Home > Puma (Tdci) > Front Passenger Door Glass |
|
|
Gazza130 Member Since: 12 Aug 2020 Location: Darwin Posts: 8 |
Hi folks - my passenger door window keeps popping off the mechanism. The lifting mechanism works fine but when you wind down the glass stays up, pulls out of the holders and later drops out of position.
I might be mistaken but it appears to be designed that so the holders slide along the bottom edge of glass base as the window moves up and down? Or should they be fixed in place? Is there a solution to ensuring the holders attach firmly to the glass and assist in pulling the glass down? Cheers! Gareth Dirty 130 in Darwin |
||
12th Aug 2021 5:33am |
|
Oldowner Member Since: 26 Dec 2018 Location: South west Posts: 616 |
The above reply refers to pre 1994 doors.
With a Puma the two white glass clips should be bonded to the door glass. They aren’t very expensive to replace, and I use sikaflex to bond them in position, with a bead all the way round to make sure they are properly held. It doesn’t have to be pretty as it is not seen! |
||
13th Aug 2021 4:57am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis