 | Home > Maintenance & Modifications > Nakatanenga wheel carrier |
 
|
|
|
| kmac Member Since: 07 Oct 2009 Location: Middlesex Posts: 1309   
|
Finally fitted the Nak swing away carrier!!
Nice, and fairly easy to fit. You have to drill one extra hole in the cross member. Had a couple of issues: 1) Two existing holes used were 8mm but bolts were 10mm - had to enlarge the holes 2) The two long bolts for attaching the carrier to the cross member are two long for my 2009 Puma (see pic below) - have asked Peter at Nak about this - waiting to hear back 
P5222129 by kmac9909, on Flickr
P5222131 by kmac9909, on Flickr |
||
22nd May 2012 4:48pm |
|
but i didn't use the stainless bolts as they dont get on very well with a mild steel chassis | kmac Member Since: 07 Oct 2009 Location: Middlesex Posts: 1309
|
Hey you can't stop at that! So what did you use and where did you get it please?
|
||
|
22nd May 2012 7:21pm |
|
| Harryb450 Member Since: 11 Dec 2011 Location: over yonder Posts: 283
|
I think they were m10x70mm (but im not 100% sure) BZP bolts, i had mine from where i work, but have a look on ebay
 |
||
|
22nd May 2012 7:28pm |
|
| kmac Member Since: 07 Oct 2009 Location: Middlesex Posts: 1309
|
Thanks |
||
|
22nd May 2012 7:38pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
