Race.it
Member Since: 27 Aug 2019
Location: Algeciras
Posts: 815
 
|
So I have searched and only nut size I can find is 27mm but not 100% on that.
I have a tdci puma (2010), and I also have a set of sumo bars. The problem I have is not all my tools are in the same location, so I need to know what size nuts the original parts have on them (the new parts I can prob work out easier)
Asking as I am going to need to swap them over, and need to get all the tools in the same place (and the vehicle is in another place)
Does anybody have a list of spanner sizes/sockets etc that are needed to swap the steering bars over, front and back, I am doing the discovery drop link conversion and have the "Laser" tool to help the old link off, but its the tie rods that I am most worried about, don't want to get it all apart then not be able to loosen one due to it being a strange different size to the rest that I was not expecting. Searching for my first Defender...and started just as Covid hit, so talk about timing.
5 months after starting the search I found it, and here is the details
|
2nd Mar 2021 8:28am |
|
