DEFENDER2.NET - View topic - Td5 nanocom readings

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Td5 nanocom readings

Page 1 of 1

Print this entire topic ·

souster4

Member Since: 11 May 2014
Location: West midlands
Posts: 153

Td5 nanocom readings

Hi guys

Managed to borrow a friends nanocom for a few days for my TD5. A previous non land rover diagnostic tool showed that the Ambient air temperature sensor was duff.

However I'm not so sure with the nanocom. I know the MAF is dead. All taken at idle and ran for 20 mins with minor reving.

Click image to enlarge

Click image to enlarge

Do these look ok to you all?

25th Feb 2021 7:04pm

achuakh

Member Since: 12 Apr 2012
Location: Singapore
Posts: 158

MAF is faulty or disconnected. From the land of the most expensive land rover defenders on planet earth. At �125k for a XS 110 csw and you get to own it only for 10yrs! Please find me a good reason to stay on this island.

27th Feb 2021 1:38pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

or its lost power supply

check between pin 1 and 3 --------pin 3 12vdc ------- pin 1 0V

pin layout 1-- 2 -- 3

27th Feb 2021 2:18pm

roel

Member Since: 08 Aug 2009
Location: Lelystad
Posts: 2039

It looks like the air temp sensor is OK. Take it for a drive and look if it changes. Roel

1984 90 2.5 na Diesel - RR V8 (1994-2001)
1997 Camel Trophy Discovery 300TDI (2001-2009)
2005 G4 Discovery III 4.4 V8 (2008-2018) It's gone but it still hurts.
2003 90 Td5 (2009-now)

28th Feb 2021 5:11pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum