Home > Wheels & Tyres > Paint recommendation |
|
|
natyeo Member Since: 27 Jan 2013 Location: Bentham Posts: 136 |
What state are they in now, if rough get them shot blasted , then I brush a zinc primer on ie
https://www.ebay.co.uk/itm/Red-Oxide-Prime...SwMWhfM931 Then a good under coat ie https://www.wilko.com/wilko-dark-grey-unde...lsrc=aw.ds Then a gloss like ie https://www.wilko.com/wilko-black-one-coat...lsrc=aw.ds Lasts on my wheels for years Bushing seems to get a good thick coat 2014 2.2 90 hard top , Warm M8000 , Scorpain winch bumper, Ashcroft rear atb 2012 2.2 tdci 110 Utility 1993 110 CSW Warn M8000 , Scorpain winch bumper , 2" lift , Roamerdive overdrive, on going 1971 Hybird 200tdi, 2 x truetracs,Extrem winch bumper, M8000, GKN overdrive & Coils 2" lift, Glynn Lewis cranked rear trail arms 1971 Series 3 88, Perkins 4203,M8000,SATs,O/D, |
||
31st Jan 2021 9:50am |
|
LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324 |
I had some Wolf wheels painted by a local alloy wheel refurb place at a cost of £50/wheel. By the time you've bought the paint and put the hours in sanding and painting, it might be the easier option. Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
31st Jan 2021 9:58am |
|
mick Member Since: 08 Feb 2010 Location: Yorkshire Posts: 2109 |
I would just get them powder coated £35 a wheel where I go for 16” wheels
|
||
31st Jan 2021 9:42pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis