 | Home > Td5 > Electric Window Failure |
 
|
|
|
| nicam Member Since: 14 Dec 2007 Location: deepest Lancashire Posts: 157  
|
Please can anyone help - Tried to lower the drivers door window the other day and nothing happened - a second attempt worked OK. Then a few days later it stopped working altogether! I`ve checked out the wiring at the door pillar and get 12 volts on both wires, each wire dropping to 0 volts when the switch is operated, up or down. Is the motor known to be dodgy or is it likely to be a wiring fault? Has anyone a wiring diagram? It is a 2002 TD5 CSW with winter pack (HFW and seats)
I have searched and found nothing - am I the first person with a window problem? Oh, and is there a best way to take off the door panel? Thanks Don`t drive faster than your angel can fly! |
||
16th Dec 2008 1:49pm |
|
| nicam Member Since: 14 Dec 2007 Location: deepest Lancashire Posts: 157
|
Sorted it!
One of the wires in the rubber conduit between the door and the pillar had fractured. Spliced in a new piece and it all works again. - No new parts required, so - Result!!  Don`t drive faster than your angel can fly! |
||
|
19th Dec 2008 10:39am |
|
| Grockle Member Since: 24 Nov 2008 Location: Peak District National Park Posts: 2266  
|
Nice cheap fix for a change. 2.4 90 XS
1968 1/32 scale Britains 109 Pick up. |
||
|
19th Dec 2008 10:58am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
