 | Home > Td5 > Torque settings for front axle |
 
|
|
|
| dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554  |
 Click image to enlarge Click image to enlarge Click image to enlarge |
||
29th Sep 2020 8:31pm |
|
| MalteseRover Member Since: 02 Jul 2013 Location: Gozo Posts: 137 
|
thank you.
I am quite  off for not finding them on the actual td5 book i bought. it is over 1.5inches thick and cannot find them/reference to them.  the bearings are not taper on top as per 300 but i searched a lot online and was moving on with the 78nm for top pin and 82nm for caliper.
just quickly having a look at the state of the swivel bearings . seems like a full strip. 
i got even more confused since upon some searches online many threads on different boards stated that the bolts cannot take the 78nm
joseph |
||
|
29th Sep 2020 8:46pm |
|
| blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17450  
|
Manuals during the Td5 era were very poor, with multiple version produced and just about none was complete (for example it is really hard finding the P38 diff covered in a Defender manual).
Be a little careful with the swivel pin torque figures. I seem to recall that there were some version of the manual which did specify ridiculously high torque figures for relatively small fasteners om the swivel pins, the result IIRC of a change of stud size. |
||
|
30th Sep 2020 9:02am |
|
| MalteseRover Member Since: 02 Jul 2013 Location: Gozo Posts: 137
|
hello,
Yes that is what upset me yesterday I foolishly bought the manual at 50€ when i got her in the hope of being able to handle repairs properly and alone. My luck.
I managed to find a list of tdci figures on the lrworkshop site. I am not into advertising stuff so pls if it is offensive remove. it has figures for a lot of components which i think are very similar https://www.lrworkshop.com/torque-specific...ender-2007 I tried torqueing up to the figures show on the 300tdi manual shared. I will hopefully change the bolts when it comes to give them a good rebuild. Proper 12.9 or 10.9 bolts sourced locally. Regards. joseph |
||
|
30th Sep 2020 9:23am |
|
| roel Member Since: 08 Aug 2009 Location: Lelystad Posts: 2039  
|
You don't have to buy manuals.
Google for Rave Land Rover and you should find some downloads. If not send me a pm. Roel 1984 90 2.5 na Diesel - RR V8 (1994-2001) 1997 Camel Trophy Discovery 300TDI (2001-2009) 2005 G4 Discovery III 4.4 V8 (2008-2018) It's gone but it still hurts. 2003 90 Td5 (2009-now) |
||
|
30th Sep 2020 9:27am |
|
| MalteseRover Member Since: 02 Jul 2013 Location: Gozo Posts: 137
|
Thanks,
I did find workshop manuals and part manuals for my series three (downloadable). I tried search a bit about td5s and got no great response. i used allbrits for some time but they changed something and it got messed up. i In respons to my earlier compliants! i had a peaceful look at the manual and realised that the 300tdi supplements include most missing parts such as swivels etc. the pages scanned and posted up earlier. I Do like to rely on some proper info and insights - WSM and forums alike but i was a bit hasty at buying the td5Manual since the engine is a tad more modern compared to the 2.25d i am used to. Have a good day. joseph |
||
|
1st Oct 2020 1:18pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
