Home > Maintenance & Modifications > Which rattle can? |
|
|
Ianh Member Since: 17 Sep 2018 Location: Essex Posts: 1971 |
I’ve used U-pol acid 8 on aluminium, and expect it would be ok on stainless steel, although it does not say for use on stainless.
https://www.u-pol.com/uk/en-uk/product/pre...zaqz8rTWf0 I use arc rite for their corroless chassis paints but they also do an acid etch that they state covers stainless as well as aluminium and galvanised steel https://www.arc-rite.co.uk/aluminium-stain...zontalTab1 Last edited by Ianh on 16th Aug 2020 11:26am. Edited 1 time in total |
||
14th Aug 2020 3:30pm |
|
nitram17 Member Since: 08 Jun 2014 Location: newcastle Posts: 2261 |
Try Bilts primer........ https://www.bilthamber.com/paints-and-coatings/etchweld ps good job on your crossmember btw! |
||
14th Aug 2020 4:01pm |
|
mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769 |
Upol acid as above. You can usually get it Halfords too. Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
14th Aug 2020 5:00pm |
|
discomog Member Since: 09 May 2015 Location: Notts/Lincs Border Posts: 2526 |
Thanks for suggestions - I shall give U-Pol No.8 a try. Defender 90XS SW
Mini Countryman Cooper S Morgan Plus 8 |
||
15th Aug 2020 7:29am |
|
gcc130 Member Since: 05 Jun 2015 Location: Wiltshire Posts: 735 |
+1 for U-pol
|
||
15th Aug 2020 9:02am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis