↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Central Locking.....Nearly There.
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
trailbear



Member Since: 14 Sep 2016
Location: Scotland
Posts: 405

United Kingdom 
Central Locking.....Nearly There.
Gents

Having come a fair way into retrofitting my 110 with central locking using all genuine Land Rover products, I have found that
that the loom that comes to the rear door doesn’t have any wires / connectors to support the rear door actuator.
I have spoken to my local Land Rover dealer who states that there is only one rear loom listed on their system and it doesn’t specify with or without central locking.

Can anyone shed any light on this please. I could tap into the B pillar loom but I hardly think that I should be doing that given there is a connector from the rear door going spare with apparently nowhere to go.

There are no matching colours in the loom and plug coming from the chassis tucked up behind the rear lights at the rear of the wheel well.

The photo shows the central locking plug ( Pink and Orange wires ) coming off the rear door loom with apparently nowhere to go. I don’t think that what l have been told is correct and I am hoping that perhaps someone else has a different answer
Post #847508 1st Aug 2020 6:15pm
View user's profile Send private message View poster's gallery Reply with quote
Martin
Site Admin


Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6605

United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Montalcino Red
It goes up the A pillar and over the roof - it's part of the roof lights harness.

So you either need to change the roof harness for a 110 central locking version OR have someone (like me! Whistle ) make up an overlay loom to add the central locking wires to your roof loom connector and the correct plug to match the one on your rear door.  1988 90 Td5 NAS soft top
2015 D90 XS SW
Post #847511 1st Aug 2020 6:48pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
trailbear



Member Since: 14 Sep 2016
Location: Scotland
Posts: 405

United Kingdom 
I have sent a pm
Post #847521 1st Aug 2020 9:07pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums