DEFENDER2.NET - View topic - Correct toolkit for 2010 90 CSW?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Correct toolkit for 2010 90 CSW?

Page 1 of 1

Print this entire topic ·

Gasket

Member Since: 30 May 2020
Location: Manchester
Posts: 629

Correct toolkit for 2010 90 CSW?

Hi folks. I have a handy bottle jack for the car, but I’d like to assemble the missing factory toolkit.

I can’t find the correct page on microcat.

Does anyone happen to have a list/photos of the original toolkit (assuming jack, chock and wheel race) that would have been correct for my vehicle?

Curious as to where it would have been stored too.

I know there’s been at least three different jacks:

a high-ish lift jack that plugs into the holes on the cross member with a steel rod crank handle

...a similar jack but with a stubby ratchet handle

...a bottle jack - but not sure if it’s the black one or the red, Disco-type one.

The wheelbrace could be a plain yellow passivated one - or a similar one with a plastic spade on the end.

If it makes any difference the vehicle has factory-fitted boost alloys.

Thank you!

30th Jun 2020 1:14am

spudfan

Member Since: 10 Sep 2007
Location: Co Donegal
Posts: 4656

Not much of a tool kit compared to earlier Land Rovers, just the bear essentials.

Click image to enlarge 1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali
2008 110 2.4 tdci csw-Zulu
2011 110 2.4 tdci csw-Masai

30th Jun 2020 11:27pm

v8bob

Member Since: 14 Mar 2018
Location: Midlands
Posts: 317

My 2010 110xs had the jack handle and wheel brace in a canvas tool roll. Nothing else in the roll. Sold now so don’t have any photos.
No clip in the battery box for the wheel brace.
It had a place for the wheel chock, might have been a plastic nut or something to hold in place.
Rubber band to hold the jack in place.
Toll roll just drops in next to the battery.

1st Jul 2020 7:23am

spudfan

Member Since: 10 Sep 2007
Location: Co Donegal
Posts: 4656

The handle sections for the jack are stored under the middle row seat. The are held by a rubber band against the metal work of the seat. I have mine wrapped in pipe foam to stop it rattling.

Click image to enlarge 1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali
2008 110 2.4 tdci csw-Zulu
2011 110 2.4 tdci csw-Masai

1st Jul 2020 9:36am

Scotm

Member Since: 28 Feb 2014
Location: Aberdeenshire
Posts: 666

2012 Defender 110 Puma 2.2 SW Orkney Grey

My jack handles all fit under the passenger seat with the jack and chock.

1st Jul 2020 5:44pm

Gasket

Member Since: 30 May 2020
Location: Manchester
Posts: 629

Thanks folks.

I’ve just been offered a toolkit from a 2015 defender that seems to all fit under the passenger seat which I think is correct. Black bottle jack and yellow-passivated handles in a bag with the wheel brace.

Scott - sounds like your setup might be what I’m looking to copy.

1st Jul 2020 5:59pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum