↓ Advertise on Defender2 ↓

Home > Off Topic > Chainsaw Purchase - Wattage advice
Post Reply  Down to end
Page 1 of 3 123>
Print this entire topic · 
Grenadier



Member Since: 23 Jul 2014
Location: The foot of Mont Blanc...
Posts: 5808

France 2011 Defender 110 Puma 2.4 DCPU Corris Grey
Chainsaw Purchase - Wattage advice
Looking to buy a small 30cm chainsaw for a bit of garden work (Trim some 10cm ash trees etc), and to cut wood for bbq and fire pit. I have my eyes on an electric Makita (no need for petrol or battery, too expensive for infrequency of use). One is 1800W the other 2000W. How much difference will there be between the two for what I want to use it for? There’s a 90€ difference between the two and also the 1800W I can drive and pick up tomorrow, whereas the other (more expensive one) will be delivered and could take up to three weeks. Advice welcome. Thumbs Up Monsieur Le Grenadier

I've not been everywhere, but it's on my list.....

2011 Puma 110DC - Corris Grey
Post #834975 3rd Jun 2020 12:44pm
View user's profile Send private message View poster's gallery Reply with quote
gilarion



Member Since: 05 Dec 2013
Location: Wales
Posts: 5110

Wales 2007 Defender 90 Other CSW Trident Green
If you will only be sawing through 10cm a 1800w motor would be fine, however, if you are thinking of cutting through say up to 50cm then the extra wattage would be more desirable due to the fact that chainsaw electric motors placed under load can become locked up and if that happens they burn out badly.
Have to say that the extra 90 for the extra wattage is a bit steep.


I own and a Machine Mart Clarke CECS405C 40cm Electric Chainsaw its 2000w and 40cm and it's faultless and priced at only £95.98 it is a bargain For those who like Welsh Mountains and narrow boats have a look at my videos and photos at..

http://www.youtube.com/user/conwy1
Post #835007 3rd Jun 2020 3:36pm
View user's profile Send private message View poster's gallery Reply with quote
windy81



Member Since: 14 Mar 2018
Location: North Wales
Posts: 311

Wales 1992 Defender 90 200 Tdi HT Firenze Red
for what its worth, bigger the better as you can cut quicker. However, smaller is lighter which is nice for the back. Horses for courses.

You'll need to familiarise yourself on sharpening it as it will be required for it to work well.

If you don't want this hassle Oregon go a self sharpening range of electric chainsaws. Sounds too good to be true, but they actually work by all accounts.
Post #835015 3rd Jun 2020 4:11pm
View user's profile Send private message View poster's gallery Reply with quote
Neilios



Member Since: 01 Nov 2017
Location: Co. Durham
Posts: 169

England 1997 Defender 110 300 Tdi HCPU Keswick Green
Would you not consider a battery one, especially if you already have a standard platform such as Dewalt or Milwaukee. I have one and for small jobs I use that over petrol and it has no power leads to worry about. 1997 110 Hi-Cap Keswick Green
1997 90 Truck Cab Blue
1996 Discovery Pickup
Post #835022 3rd Jun 2020 4:45pm
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 8026

 2011 Defender 110 Puma 2.4 USW Stornoway Grey
Or buy a silky. Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop
Post #835047 3rd Jun 2020 7:13pm
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17376

United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
For the sizes you mention, I'd use a Silky (but be careful, more arborists cut themselves with Silkys than with chainsaws)!

If you need a leccy one, the Milwaukee M18 FUEL cordless saw is really very, very good indeed, but is top dollar.
Post #835048 3rd Jun 2020 7:17pm
View user's profile Send private message View poster's gallery Reply with quote
Chopperone



Member Since: 13 Nov 2016
Location: Derbyshire
Posts: 396

United Kingdom 
Makita make battery ones.
Their pruning saw is almost like a top handle saw but has two handles & uses one battery.
However price is the factor again....
Can’t fault their drills & other tools (l use a lot of makita kit)
Using 240v outside has it’s issues
Guy May your life be like toilet paper ; long & useful.
Post #835101 4th Jun 2020 7:49am
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 8026

 2011 Defender 110 Puma 2.4 USW Stornoway Grey
blackwolf wrote:
For the sizes you mention, I'd use a Silky (but be careful, more arborists cut themselves with Silkys than with chainsaws)!


the worse injury i have is from a silky working at height rather than chainsaw so that proves ^^^^ Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop
Post #835106 4th Jun 2020 8:13am
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17376

United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
Yes, it is a curious statistic but I believe one which is factually correct. I suspect that part of the reason is that everyone knows a chainsaw is dangerous and is therefore fairly careful, but a handsaw, well that can't do any harm, can it? A razor-sharp Silky certainly can, as all those cut left arms when the "cut and chuck" goes wrong prove!
Post #835109 4th Jun 2020 8:28am
View user's profile Send private message View poster's gallery Reply with quote
Grenadier



Member Since: 23 Jul 2014
Location: The foot of Mont Blanc...
Posts: 5808

France 2011 Defender 110 Puma 2.4 DCPU Corris Grey
Thank you all. I have a silky, but we’re about to completely landscape our garden and we have a considerable number of trees to get rid of, 15+, some 12m tall, plus many out-of-control 2m bushes. I don’t want to waste a valuable few days with the gardeners doing it. So that’s a lot of arm work I want to avoid as after confinement my right arm is big enough already. Should I have said that? Whistle

I’ve chosen the McCulloch (now owned by Husky) 2000W 40cm with cable. I have Makita batteries, but their saws are still expensive and only last 40-60mins. This will be three or four days, all day, so a cable makes sense.

Anyway, thanks as ever.... Monsieur Le Grenadier

I've not been everywhere, but it's on my list.....

2011 Puma 110DC - Corris Grey
Post #835112 4th Jun 2020 8:43am
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 8026

 2011 Defender 110 Puma 2.4 USW Stornoway Grey
yep cable one makes sense if avoiding the petrol kind. Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop
Post #835117 4th Jun 2020 9:06am
View user's profile Send private message View poster's gallery Reply with quote
Bluest



Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4209

United Kingdom 2007 Defender 110 Puma 2.4 XS CSW Java Black
Grenadier wrote:
Thank you all. I have a silky, but we’re about to completely landscape our garden and we have a considerable number of trees to get rid of, 15+, some 12m tall, plus many out-of-control 2m bushes. I don’t want to waste a valuable few days with the gardeners doing it. So that’s a lot of arm work I want to avoid as after confinement my right arm is big enough already. Should I have said that? Whistle

I’ve chosen the McCulloch (now owned by Husky) 2000W 40cm with cable. I have Makita batteries, but their saws are still expensive and only last 40-60mins. This will be three or four days, all day, so a cable makes sense.

Anyway, thanks as ever....


I got a McCulloch petrol one and it's been a quality saw. Only downside is service bits and spares are hard to come by. Get yourself a chain sharpening set (Oregon do a decent one) and touch the cutters up regularly. A sharp chain makes a big difference, especially on lower powered machines. 2007 110 TDCi Station Wagon XS
Post #835139 4th Jun 2020 11:57am
View user's profile Send private message View poster's gallery Reply with quote
Grenadier



Member Since: 23 Jul 2014
Location: The foot of Mont Blanc...
Posts: 5808

France 2011 Defender 110 Puma 2.4 DCPU Corris Grey
Thumbs Up Monsieur Le Grenadier

I've not been everywhere, but it's on my list.....

2011 Puma 110DC - Corris Grey
Post #835141 4th Jun 2020 11:59am
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 8026

 2011 Defender 110 Puma 2.4 USW Stornoway Grey
I Sharpe every two fills. Risers and teeth Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop
Post #835148 4th Jun 2020 1:10pm
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 8026

 2011 Defender 110 Puma 2.4 USW Stornoway Grey
Last week was not a good chainsaw week.


Click image to enlarge


From a 576xp, not best pleased. Hoping to salvage cylinder. Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop
Post #835149 4th Jun 2020 1:12pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 3 123>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums