DEFENDER2.NET - View topic - Front and rear anti roll bars

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > Front and rear anti roll bars

Page 1 of 1

Print this entire topic ·

lb73

Member Since: 27 May 2016
Location: North Wales
Posts: 290

Front and rear anti roll bars

When I bought my 99 300tdi csw it never had the roll bars fitted - I presumed they had been removed by the previous owner. Anyway I’m thinking I’d like to refit them so I checked out the mounting points the other day, the back ones are fine and look ready to have it refitted. However on the front the brackets are present on the axle but there are no mounting points on the chassis like these

Click image to enlarge

The only mounting points I can see is these - sorry for the poor photo, which I presume are for something else, as they look set to far back.

Click image to enlarge

I know you can buy the weld on mounting brackets to weld to the chassis, so that one option, but was just wondering the reason for it, was there a different front anti roll bar set up on earlier models? Thanks in advance. 1999 300TDI 110 CSW BMW 3.0
1972 VW Beetle 1200
2002 Dax Rush 3.9 V8
2012 Audi A3 tdi
2020 Renault Kangoo electric

5th May 2020 8:29pm

Litch

Member Since: 10 Mar 2013
Location: Oxfordshire
Posts: 762

I don't have anti roll bars on my 90 but my new (300TDi) chassis has them fitted, I assume these are the front ones you are referring to (just behind & below the engine mountings)?

Click image to enlarge

Click image to enlarge ONE LIFE, GET IT!

6th May 2020 4:43pm

lb73

Member Since: 27 May 2016
Location: North Wales
Posts: 290

Yes they are the ones, think I might order the weld on brackets, liking the gav chassis cheers. 1999 300TDI 110 CSW BMW 3.0
1972 VW Beetle 1200
2002 Dax Rush 3.9 V8
2012 Audi A3 tdi
2020 Renault Kangoo electric

6th May 2020 8:53pm

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 623

2007 Defender 90 Puma 2.4 HT Aintree Green

The brackets were standard fit from 94 onwards so yours have been cut off for some reason, or the chassis has been changed.

The weld on brackets are fine, I’ve fitted a few of them years ago when upgrading pre 300tdi chassis 90s to antiroll bars,well worth doing.

7th May 2020 3:06am

lb73

Member Since: 27 May 2016
Location: North Wales
Posts: 290

Thanks for that, presume they have been removed for whatever reason. Will get a weld on set ordered. 1999 300TDI 110 CSW BMW 3.0
1972 VW Beetle 1200
2002 Dax Rush 3.9 V8
2012 Audi A3 tdi
2020 Renault Kangoo electric

7th May 2020 5:48am

Mountain_man

Member Since: 09 Dec 2011
Location: Right side of Offas Dyke
Posts: 756

If you need antiroll bars, rather than pay through the nose for a set of defender ones, it is worth noting the tdi Discovery ones fit just fine (and are usually thrown in the scrap). You will need the 4 bolt U clamp for the rear from a defender though as the disco only used a 2 bolt clamp. The fronts are the same.

7th May 2020 9:18am

lb73

Member Since: 27 May 2016
Location: North Wales
Posts: 290

Cheers for the info, will get looking. 1999 300TDI 110 CSW BMW 3.0
1972 VW Beetle 1200
2002 Dax Rush 3.9 V8
2012 Audi A3 tdi
2020 Renault Kangoo electric

8th May 2020 9:42pm

Mountain_man

Member Since: 09 Dec 2011
Location: Right side of Offas Dyke
Posts: 756

if you are on FB?

https://www.facebook.com/groups/9072945093...p_activity

9th May 2020 11:00pm

lb73

Member Since: 27 May 2016
Location: North Wales
Posts: 290

1999 300TDI 110 CSW BMW 3.0
1972 VW Beetle 1200
2002 Dax Rush 3.9 V8
2012 Audi A3 tdi
2020 Renault Kangoo electric

10th May 2020 9:24pm

Procta

Member Since: 03 Dec 2016
Location: Sunderland
Posts: 5172

Laugh was, when i did this to my TDI, I only had the brackets for the front, Me and my mate later fitted the rear. We had to weld the rear brackets on the back. So looks like they must have added the full works on the later 300s, Mine was a 97 plater.
Funny thing was, it was the very last upgrade i did and never even got the use of

Defender TD5 90 ---/--- Peugeot 306 HDI hatch back

Success is 90% Inspiration and 4 minutes Preparation # you can make it!

11th May 2020 11:25pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum