DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Transmission

Page 1 of 1

Print this entire topic ·

chris d3

Member Since: 06 Apr 2010
Location: sunderland
Posts: 371

2011 Defender 110 Puma 2.2 USW Stornoway Grey

Transmission

I’m after a little advice the slave cylinder has started to leak. Apparently it’s inside the bell housing and you have to take the box out. When I do a search for the car sometimes it says it’s a 2.4 on the log book it’s a 2.2. Struggling a little bit finding the rite clutch. Not sure what to do.

While the box is out obviously Change the out put shaft

Not sure about the clutch it works fine looking for advice on this I do less than 4000 a year.

The car is 2011 November

18th Apr 2020 11:04pm

LR90XS2011

Member Since: 05 Apr 2011
Location: bickenhill
Posts: 3639

2011 Defender 90 Puma 2.4 XS CSW Galway Green

the engine changed from 2.4 to 2.2 for the 2011 to 2012 model year, the clutch is basically the same on the 2.4 and 2.2 but there is a change to the slave cylinder resulting in a different hydraulic fitting being needed between the 2 model years DEFENDER 90 TDCI XS,

I hope everyone is well and your land rovers make you happy

19th Apr 2020 4:03am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum