↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Vacuum pump oil pipe
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
beardiedog



Member Since: 01 Aug 2019
Location: Northampton
Posts: 27
England 2003 Defender 110 Td5 G4 Challenge Tangiers Orange
Vacuum pump oil pipe
I removed the alternator at the weekend and made a bit of a mess of the little oil pipe attached to the brake server vacuum pump. The part is apparently obsolete can anybody advise on somewhere I could get a bit of pipe the same size I don't know where or what to measure. The part is apparently SQC500010

Cheers
Post #823622 6th Apr 2020 8:21am
View user's profile Send private message View poster's gallery Reply with quote
rallysteve



Member Since: 10 Feb 2014
Location: Cumbria
Posts: 2229
United Kingdom 2002 Defender 110 Td5 DCPU Keswick Green
Have a look here:
https://www.lrworkshop.com/diagrams/land-r...ator_53203

Looks like YKL100120 is the bit to me.

Cheers,
Steve 02' 110 TD5 Double Cab Rebuild Thread
Post #823626 6th Apr 2020 8:36am
View user's profile Send private message View poster's gallery Reply with quote
beardiedog



Member Since: 01 Aug 2019
Location: Northampton
Posts: 27
England 2003 Defender 110 Td5 G4 Challenge Tangiers Orange
HI It's number 10 in the diagram the other pipe is OK I have ordered a new copper washer but it's the drain pipe I need
Post #823629 6th Apr 2020 8:42am
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17387
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
The critical measurements are the internal diameter and the length.

It is a very simple length of (oil-resistant) rubber hose, and any hose or hydraulic pipe supplier should be able to sort you out.
Post #823632 6th Apr 2020 8:48am
View user's profile Send private message View poster's gallery Reply with quote
dorsetsmith



Member Since: 30 Oct 2011
Location: South West
Posts: 4554
The OD of nylon pipe that corners to the pipe your after is 8.84 mm. SQC500010 is 70 mm long prox
Post #823639 6th Apr 2020 9:23am
View user's profile Send private message View poster's gallery Reply with quote
beardiedog



Member Since: 01 Aug 2019
Location: Northampton
Posts: 27
England 2003 Defender 110 Td5 G4 Challenge Tangiers Orange
thanks OD do you mean outside diameter will than mean the internal will be OK or should I measure that, sorry I'm a bit clueless with this..
Post #823642 6th Apr 2020 9:30am
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17387
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
I think that dorsetsmith is actually saying that the outside diameter of the pipe that the one you need fits on to is 8.84mm, so the inside diameter of the one you need should fit onto this one, so probably about 8.5mm.

I think.....


If in doubt, measure the outlet on the vac pump and the spigot on the engine, these should give you the ID for the pipe you need.
Post #823663 6th Apr 2020 12:31pm
View user's profile Send private message View poster's gallery Reply with quote
beardiedog



Member Since: 01 Aug 2019
Location: Northampton
Posts: 27
England 2003 Defender 110 Td5 G4 Challenge Tangiers Orange
OK thanks that makes sense thinking about it the outside diameter would be more than that thanks dorsetsmith
Post #823665 6th Apr 2020 12:40pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums