 | Home > Puma (Tdci) > URGENT please check... |
 
|
|
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5018  
|
I havn't got one either or can't see it, presume it's quite obvious - one less prob.... |
||
29th Jun 2011 12:54pm |
|
| spudfan Member Since: 10 Sep 2007 Location: Co Donegal Posts: 4761 
|
10mm socket 1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali 2008 110 2.4 tdci csw-Zulu 2011 110 2.4 tdci csw-Masai |
||
|
29th Jun 2011 1:01pm |
|
| RED-DOT Member Since: 29 Jun 2009 Location: stirling Posts: 2363 
|
Just tightened mine up, there are 2X10mm headed bolts... simples! 2008 RS4 gone, 123d M Sport, and a Puma 90 XS..
|
||
|
29th Jun 2011 1:11pm |
|
| spudfan Member Since: 10 Sep 2007 Location: Co Donegal Posts: 4761
|
Also might need to check this. I noticed that the rear anti roll bar (Puma 110) had a mark in it on the driver's side. It was caused by the anti roll bar hitting off the edge of the fuel tank guard. I just cut a few millimetres off the offending edge of the tank guard with a junior hacksaw. 1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali 2008 110 2.4 tdci csw-Zulu 2011 110 2.4 tdci csw-Masai |
||
|
29th Jun 2011 1:46pm |
|
| RED-DOT Member Since: 29 Jun 2009 Location: stirling Posts: 2363
|
The damge that could occur if that red lifting eye flew off when lifting the engine out would be scarey... i take it LR know to check this when working on them? 2008 RS4 gone, 123d M Sport, and a Puma 90 XS..
|
||
|
29th Jun 2011 10:11pm |
|
| mick Member Since: 08 Feb 2010 Location: Yorkshire Posts: 2109  
|
Maybe someone will put a photo up. |
||
|
29th Jun 2011 10:27pm |
|
| spudfan Member Since: 10 Sep 2007 Location: Co Donegal Posts: 4761
|
View from side over heater
 Click image to enlarge Anyone else got this messy stuff in front of the bracket? View from front of engine Click image to enlarge Sorry about the spots but it was raining when I went out! Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali 2008 110 2.4 tdci csw-Zulu 2011 110 2.4 tdci csw-Masai |
||
|
29th Jun 2011 11:06pm |
|
| mick Member Since: 08 Feb 2010 Location: Yorkshire Posts: 2109
|
Dealers must av taken mine off when it was pdi never seen that before.
|
||
|
29th Jun 2011 11:14pm |
|
| doublea Member Since: 12 Jul 2011 Location: Aberdeenshire Posts: 495 
|
Mine chafed a hole in the wiring loom on saturday, but it's not loose. The engine management fuse blew and we were stranded for an hour and a half.
|
||
|
12th Jul 2011 12:02pm |
|
| Happyoldgit Member Since: 14 Sep 2007 Location: Norfolk Posts: 3471 
|
I would think the safest bet would be to remove it altogether. Steve.
Owned numerous Land Rover vehicles of all shapes and sizes over the decades. Current Defender: A non tarts hand-bagged Puma 110 XS USW. [Insert something impressive here such as extensive list of previous Land Rovers or examples of your prestigeous and expensive items, trinkets, houses, bikes, vehicles etc] http://forums.lr4x4.com I used to be Miserable ...but now I'm ecstatic. |
||
|
12th Jul 2011 5:07pm |
|
| Kez Member Since: 11 Apr 2011 Location: UK Posts: 271 
|
Glad someone else asked for a photo, was thinking I must be totally stupid - seems I also don't have one, nor indeed does it look like there ever has been one since it left factory as no marks on nearby cables etc ?
is it possible they are actually meant to be removed before leaving the factory, the fact they are painted bright red makes me wonder 
 |
||
|
12th Jul 2011 5:48pm |
|
| Happyoldgit Member Since: 14 Sep 2007 Location: Norfolk Posts: 3471
|
Following my comments above I've just gone out and unbolted and removed mine to uncover witness marks both on the lifting eye and loom conduit
 I've replaced the bolts using a bit of Loctite and thrown the eye in the cubby box.
For those who prefer to polish rather than work on their vehicle or who are otherwise challenged in the spanner department I reckon some decent insulating tape or similar wound around the loom conduit would provide a bit of protection from chaffing. Steve. Owned numerous Land Rover vehicles of all shapes and sizes over the decades. Current Defender: A non tarts hand-bagged Puma 110 XS USW. [Insert something impressive here such as extensive list of previous Land Rovers or examples of your prestigeous and expensive items, trinkets, houses, bikes, vehicles etc] http://forums.lr4x4.com I used to be Miserable ...but now I'm ecstatic. |
||
|
12th Jul 2011 6:12pm |
|
| Kez Member Since: 11 Apr 2011 Location: UK Posts: 271
|
Hear Boots new sell medication over the counter for such problems  |
||
|
12th Jul 2011 6:23pm |
|
| XS Pete Member Since: 13 Jan 2011 Location: Suffolk Posts: 632 
|
I can only deduce that this must have been deleted from recent models, as there isn't one one mine and no evidence that there was ever one fitted. Another thought, I suppose that maybe they're meant to be removed after fitting in the factory which is why they're painted red to make them easy to spot by quality control.
Pete |
||
|
12th Jul 2011 9:19pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
