Home > In Car Electronics > Extra 12v socket installation issue |
|
|
LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324 |
The obvious thought is that the wires are reversed. You'd still get 12v but the sat nav probably needs the polarity to be correct. Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
25th Sep 2019 7:59pm |
|
ginjez Member Since: 18 Sep 2011 Location: huddersfield Posts: 1760 |
Hi Darren, polariity is correct according to volt meter.
|
||
25th Sep 2019 8:09pm |
|
LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324 |
Dunno then. Duff socket contacts, maybe? Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
25th Sep 2019 8:49pm |
|
Lefty loosey Member Since: 10 Sep 2019 Location: Bridgend Posts: 2 |
Bad connection somewhere when the circuit is under load the voltage drops. I know the satnav will only be a small load but might drop it enough to not power the satnav and only the led.
|
||
25th Sep 2019 9:01pm |
|
ginjez Member Since: 18 Sep 2011 Location: huddersfield Posts: 1760 |
I'll check earth tomorrow.
Welcome to forum btw |
||
25th Sep 2019 9:04pm |
|
Pilgrimmick Member Since: 16 Nov 2015 Location: Highlands Posts: 582 |
12.7v is that with the engine running? If so it is low, wants to be about 14v 80" 1948
Lightweight V8 Bowler Tomcat 130 Station wagon 90 300tdi (Santana PS10 pick up) Range Rover L322 (Ful fat) |
||
26th Sep 2019 7:29am |
|
ginjez Member Since: 18 Sep 2011 Location: huddersfield Posts: 1760 |
Checked tonight and you are correct |
||
26th Sep 2019 7:03pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis