↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > REB500200 REB500220 Puma front coil spring rates
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Rickoz



Member Since: 27 Jan 2014
Location: 4000
Posts: 39
Australia 2014 Defender 90 Puma 2.2 SW Keswick Green
REB500200 REB500220 Puma front coil spring rates
Hello all, I done a search here and everywhere looking for the Load and Load Rating of the REB500200 / REB500220 Puma Defender front springs but all I seem to find is the same basic info copied on every Forum.
I’ve found the colour coding and free length, they are - (200) Red/Green/White 370mm and (220) Red/Green/Orange 380mm
This info is easily available for the older springs eg:
NRC9446 Blue/Green 15.19” Load Rating 175lb/inch (load 819.96lb)
NRC9447 Blue/Yellow 14.80” Load Rating 175lb/inch (load 819.98lb)

Anyone know or can point to a link which the Load Rating lb/” and (Load lb) at all?
Regards, Rickoz.
Post #787984 21st Aug 2019 3:14am
View user's profile Send private message View poster's gallery Reply with quote
Naks



Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2638
South Africa 2010 Defender 90 Puma 2.4 SW Alpine White
Rickoz, are these new part numbers not just superceding the old ones?

that is, isn't REB500220 just the new part number for NRC9446?

I'm sure you've seen this site, with the various part number and info? http://red90.ca/rovers/springinfo.html --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged



Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ
Post #787989 21st Aug 2019 5:24am
View user's profile Send private message View poster's gallery Reply with quote
Rickoz



Member Since: 27 Jan 2014
Location: 4000
Posts: 39
Australia 2014 Defender 90 Puma 2.2 SW Keswick Green
Sorry I don’t know I did think this could be the case for half a second but why change the model numbers & colour codes.
I have just counted the coil numbers & the NRC’s are 7.75 coils & the REB’s seem to be 7.00 If I’ve counted correctly.
Post #787994 21st Aug 2019 6:37am
View user's profile Send private message View poster's gallery Reply with quote
CarMan



Member Since: 29 Nov 2010
Location: Cotswolds
Posts: 1862
United Kingdom 
Guessing you've seen this:


Click image to enlarge Rob

1993 200tdi 90 hard-top
1998 300tdi 90 soft-top
2016 2.2 XS 90 hard-top (sold)
Post #787998 21st Aug 2019 7:09am
View user's profile Send private message View poster's gallery Reply with quote
windy81



Member Since: 14 Mar 2018
Location: North Wales
Posts: 311
Wales 1992 Defender 90 200 Tdi HT Firenze Red
https://www.defender2.net/forum/topic68749.html

I put a link in this thread where a similar table to the above states all the spring rates etc.
Post #788001 21st Aug 2019 7:22am
View user's profile Send private message View poster's gallery Reply with quote
Rickoz



Member Since: 27 Jan 2014
Location: 4000
Posts: 39
Australia 2014 Defender 90 Puma 2.2 SW Keswick Green
CarMan wrote:
Guessing you've seen this:


Click image to enlarge

Yep that the info that everyone reposts but that doesn’t tell us the lb/inch or the Load
Post #788015 21st Aug 2019 9:37am
View user's profile Send private message View poster's gallery Reply with quote
Bluest



Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4210
United Kingdom 2007 Defender 110 Puma 2.4 XS CSW Java Black
This table has spring rates in it. Any good? http://red90.ca/rovers/springinfo.html 2007 110 TDCi Station Wagon XS
Post #788019 21st Aug 2019 10:15am
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324
United Kingdom 
The table on the red90 site that crops up a lot is, unfortunately, quite old. As such, it doesn't cover the newer spring markings and ratings of Puma-era vehicles. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #788052 21st Aug 2019 3:42pm
View user's profile Send private message View poster's gallery Reply with quote
Naks



Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2638
South Africa 2010 Defender 90 Puma 2.4 SW Alpine White
^

indeed, and none of the online shops list that info either.

Neither does the workshop manual, and I doubt the dealers will even understand the question Rolling Eyes --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged



Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ
Post #788194 22nd Aug 2019 8:28am
View user's profile Send private message View poster's gallery Reply with quote
Rickoz



Member Since: 27 Jan 2014
Location: 4000
Posts: 39
Australia 2014 Defender 90 Puma 2.2 SW Keswick Green
I guess it can be worked out buy the compressed height of the springs if someone measures there STD Puma with no accessories added to there 4B
As far as I know the free lengths are D/side 370mm & P/side 380mm (RHD)
Post #788664 26th Aug 2019 11:39am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums