 | Home > For Sale & Wanted > [Wanted] Galvanised front bumper |
 
|
|
|
| TDCi Guy Member Since: 17 Aug 2014 Location: Yorkshire Posts: 286   
|
Looking for a standard galvanised front bumper for the project, possibly even a military spec one with the pin and cut-out.
Preferably in northern England. Tom @tditomprice 100” Defender Hybrid 2010 Alaska White 90 HT |
||
31st Jul 2019 8:41pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
They're available new from Paddocks for about £60 and they're really good quality. I bought one and painted it black:
 Click image to enlarge Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
31st Jul 2019 8:53pm |
|
| MartinK Member Since: 02 Mar 2011 Location: Silverdale (Lancashire/Cumbria Border) Posts: 2665 
|
The military one is part # rrc3508. The older stock are galvanized, but the newer ones seem to be painted black (not sure if they are galv underneath).
I have one, very pleased, has a recovery/hitch in the centre. Mine was Galv but i painted it black. Having the small "A Bar" for the spot lights means I can't get the Std recovery pin in from the top tho Click image to enlarge Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's) |
||
|
1st Aug 2019 10:02am |
|
| TDCi Guy Member Since: 17 Aug 2014 Location: Yorkshire Posts: 286
|
Thanks folks, didn't realise they were available for such little money
 Tom
@tditomprice 100” Defender Hybrid 2010 Alaska White 90 HT |
||
|
1st Aug 2019 10:19am |
|
| MartinK Member Since: 02 Mar 2011 Location: Silverdale (Lancashire/Cumbria Border) Posts: 2665
|
Mine was under £100 IIRC... they seem to be a bit steeper at the moment... Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's)
|
||
|
1st Aug 2019 10:46am |
|
| Screbble Member Since: 26 Apr 2015 Location: Lancashire Posts: 2098 
|
That's a smashing job LandRoverAnorak
I've been through quite a few new std bumpers over the years, and despite my ritual OCD Dinitrol treatment on the inside they all look worse for wear after a short time. I was contemplating buying a black powder coated stainless steel bumper, but looking at your painted galvanised bumper I might just change my mind 
What level of prep did you do, and what was your chosen finish? And apologies for hijacking the thread (a bit) |
||
|
2nd Aug 2019 7:49pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
Here you go, Screbble - read all about it here:
https://www.defender2.net/forum/post729132.html#729132 Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
2nd Aug 2019 9:18pm |
|
| Screbble Member Since: 26 Apr 2015 Location: Lancashire Posts: 2098
|
Cheers Darren - much appreciated
Great thread, but the wider content has distracted me in many ways and will inevitably cost me money  |
||
|
3rd Aug 2019 8:04am |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
Excellent
Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
3rd Aug 2019 8:07am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
