 | Home > Puma (Tdci) > Roll Cage |
 
|
|
|
| JPE Member Since: 19 Nov 2018 Location: South West England Posts: 334   
|
Any suggestions on suitable roll cages for a 110 SW ? Any pictures ?
|
||
8th Jul 2019 9:10pm |
|
| JPE Member Since: 19 Nov 2018 Location: South West England Posts: 334
|
Thanks, looks good.
|
||
|
8th Jul 2019 9:28pm |
|
| Thon Member Since: 22 Nov 2015 Location: Salisbury Plain Posts: 696
|
 Click image to enlarge I have this one fitted - http://www.safetydevices.com/expedition/pr.../656/1805/ I wanted a less obtrusive look, hence 6 of the mounting points and most of the cage are internal. Click image to enlarge Total pain in the arse to fit though - lots of trim panels to be fettled and unknown to me at the time Safety Devices pictures on their webpage neglected to show the slip clamp joint in the rear hoop .... just as well the roof had to come off for a respray anyway. It took 2 days to do the A and B post hoops, and probably another 6 to complete it. |
||
|
8th Jul 2019 10:06pm |
|
| jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8024  
|
^^^^ this is a really neat solution and you have to see it to understand the work it took to fit it. if i went full cage (just have a SD internal B Hoop) i would do take this option. Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
|
9th Jul 2019 3:19pm |
|
| Welshsurferdude Member Since: 23 Feb 2012 Location: Newport Posts: 2402 
|
Have this cage no idea what make it is as it came off a Defender 110 that was used as a site vehicle in Seirra Leone and was brought back and broken up for parts
total cost including fitting was £700 Click image to enlarge 2008 Santorini Black 110 XS USW (Sold) 2015 Discovery 4.5 Black pack Firenze red XS 2008 Corris Grey 110 XS USW (sold) 2011 Santorini Black 110 XS USW (Sold) |
||
|
9th Jul 2019 5:07pm |
|
| Zed Member Since: 07 Oct 2017 Location: In the woods Posts: 3286 
|
That looks great. So much neater. Excellent work. |
||
|
9th Jul 2019 5:16pm |
|
| diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6092 
|
I've got a P&P full external on mine:
Click image to enlarge In hindsight I wish I'd have got the camel type like Thon has.... but too late now. Although mine does protect the bodywork from thick branches and carpark height restriction signs (that are wrong....) |
||
|
9th Jul 2019 7:54pm |
|
| Thon Member Since: 22 Nov 2015 Location: Salisbury Plain Posts: 696
|
It works for under-height signs as the front A to B hoop arms and windscreen frame are external but does nothing to protect the sides in tight green lanes, so not so good there.
As JST said, it is quite a feat to fit it properly (I only did the relatively easy bit at the front) but it is neat and tidy inside which pleases me. It's a bit OTT but I wanted to ensure that the dog was also protected in the event of a mishap, which adds quite a lot of complexity to the build. It certainly wasn't the bargain that WSD found - what a steal! I deliberately didn't count up how much it cost to buy and fit but it has seen a lot of mileage off road and I also wanted to have it in place before I spent 4 months with wife, dog and baby daughter amongst Italian drivers .... Gratuitous Defender and Spanner photo: - Click image to enlarge |
||
|
9th Jul 2019 9:34pm |
|
| Avelingporter Member Since: 25 Jan 2016 Location: Southampton Posts: 405 
|
Must be photoshop, spanners don’t sit still for that long to take a photo!!! 😉
|
||
|
10th Jul 2019 6:32am |
|
| VVS210 Member Since: 12 Nov 2016 Location: Hampshire Posts: 953
|
Yes they do... you just have to tire them out first! This can usually be achieved by about the end of January provided that you start them off during the early partridge shooting season and don't give them too much of a rest over Christmas.
 |
||
|
10th Jul 2019 6:45am |
|
| Thon Member Since: 22 Nov 2015 Location: Salisbury Plain Posts: 696
|
He's not a bad lad for obedience after spending many hundreds of patient hours in training him; that said sitting is his least favourite position ...
Click image to enlarge Click image to enlarge Ran out of patience .... Click image to enlarge |
||
|
10th Jul 2019 8:57pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
