 | Home > Maintenance & Modifications > Painting plastic parts |
 
|
|
|
| boxoftricks Member Since: 06 Feb 2019 Location: Home Counties Posts: 747   
|
Just make sure you use a plastic primer. Wipe down before spraying with an alcohol wipe to remove dust and muck. Spray in a warm room, not outside in the cold. Build up the layers slowly. Do a test spray to get a feel for the rattle can.
|
||
11th Apr 2019 9:01pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20333
|
Or you could use Panel wipe, go slow on plastic though to avoid static as it is prone to that.
And as mentioned plastic primer is a must, a red scotch pad to key the surface before priming is ideal. You can do a guide coat too before flatting the primer prior to base coat too if you wish. This gives you the perfect finish. I also like to wipe off any wipe residue once dry too, as this can be present so I tend to panel wipe then when flashed off dry wipe off lightly. Tack cloths are also good too have. I use all Upol mainly for the above. Should you get any clouding in clear coat. (Excess humidity when spraying - try and avoid!) A heat gun carefully used will often draw the moisture out to full gloss. ⭐️⭐️God Bless the USA 🇬🇧🇺🇸 ⭐️⭐️ |
||
|
11th Apr 2019 10:07pm |
|
| bogwert Member Since: 02 Sep 2016 Location: Dundee Posts: 194  
|
If you are looking repainting black plastic I would recommend Buzzwelds Plastic in one.
Really simple: clean, key, (clean again) and spray. http://www.buzzweld.co.uk/pio.html I used it to redo the front grill and light surrounds! Excellent results! last page of my thread has a few before and after photos... and the make shift spray booth! https://www.defender2.net/forum/topic49869-60.html Chris 2014 Discovery 4 TDV6 HSE 2003 Defender 90 TD5 CSW  |
||
|
12th Apr 2019 9:06am |
|
| deaallen Member Since: 15 Feb 2016 Location: Basingstoke Posts: 264 
|
+1 for buzzweld, great stuff which has completely transformed some old trim I bought. also very easy to use and apply
|
||
|
12th Apr 2019 6:48pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
I recently painted a couple of light surrounds to body colour and was pleased with the result after using plastic primer bought from Halfords. It's strange stuff though; it comes out as a sort of mist that remains slightly tacky until coated with regular primer. Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
12th Apr 2019 9:19pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10742 
|
I did the same as LRA, with the same good resuts
 1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
|
15th Apr 2019 9:32pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
