↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Fixing Dixon Bate 5T tow jaw to cross member
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Odin



Member Since: 29 Apr 2011
Location: Aberdeenshire
Posts: 237
Scotland 2012 Defender 110 Puma 2.2 USW Santorini Black
Fixing Dixon Bate 5T tow jaw to cross member
I'm looking to get bolts to fit the Dixon Bate tow jaw to the rear cross member of my Puma as a recovery point. Is it simply a case of bolting it on using M10 bolts x 60-65mm c/w a spring washer?

Thanks.
Post #71231 16th May 2011 9:29pm
View user's profile Send private message View poster's gallery Reply with quote
bm52



Member Since: 04 Apr 2010
Location: Kent
Posts: 2189
United Kingdom 2014 Defender 110 Puma 2.2 XS CSW Havana
i would suggest a spreader plate behind the cross member BM52
Post #71235 16th May 2011 9:37pm
View user's profile Send private message View poster's gallery Reply with quote
Odin



Member Since: 29 Apr 2011
Location: Aberdeenshire
Posts: 237
Scotland 2012 Defender 110 Puma 2.2 USW Santorini Black
Thanks but it's got captive nuts so I don't think that's easily done. I'm more worried that the threads shall already be damaged / corroded.
Post #71237 16th May 2011 9:42pm
View user's profile Send private message View poster's gallery Reply with quote
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6092
United Kingdom 2006 Defender 110 Td5 SW Epsom Green
When I built my (Td5) 110, I had the chassis galvanised.

Of course, when I got the chassis back from the coaters, the threads were all blocked up, so i tried running a tap through the towbar holes (to fit a NATO hitch) but the theads came out very messed up, so in the end I drilled them out and tapped to M16 (factory size is M14)

These fitted (just) through the hitch holes and made the whole thing a much tighter fit...the M14's seemed to rattle around the hitch holes
Post #71258 17th May 2011 6:40am
View user's profile Send private message View poster's gallery Reply with quote
mse



Member Since: 06 Apr 2008
Location: UK
Posts: 5035
United Kingdom 2016 Defender 110 Puma 2.2 XS CSW Scotia Grey
They are threaded and ISTR you will struggle to get a spreader plate behind, even if you could Mike
Post #71350 17th May 2011 5:10pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums