Home > Off Topic > Chainsaw Purchase - Wattage advice |
|
|
Grenadier Member Since: 23 Jul 2014 Location: The foot of Mont Blanc... Posts: 5808 |
Looking to buy a small 30cm chainsaw for a bit of garden work (Trim some 10cm ash trees etc), and to cut wood for bbq and fire pit. I have my eyes on an electric Makita (no need for petrol or battery, too expensive for infrequency of use). One is 1800W the other 2000W. How much difference will there be between the two for what I want to use it for? There’s a 90€ difference between the two and also the 1800W I can drive and pick up tomorrow, whereas the other (more expensive one) will be delivered and could take up to three weeks. Advice welcome. Monsieur Le Grenadier
I've not been everywhere, but it's on my list..... 2011 Puma 110DC - Corris Grey |
||
3rd Jun 2020 12:44pm |
|
gilarion Member Since: 05 Dec 2013 Location: Wales Posts: 5110 |
If you will only be sawing through 10cm a 1800w motor would be fine, however, if you are thinking of cutting through say up to 50cm then the extra wattage would be more desirable due to the fact that chainsaw electric motors placed under load can become locked up and if that happens they burn out badly.
Have to say that the extra 90 for the extra wattage is a bit steep. I own and a Machine Mart Clarke CECS405C 40cm Electric Chainsaw its 2000w and 40cm and it's faultless and priced at only £95.98 it is a bargain For those who like Welsh Mountains and narrow boats have a look at my videos and photos at.. http://www.youtube.com/user/conwy1 |
||
3rd Jun 2020 3:36pm |
|
Neilios Member Since: 01 Nov 2017 Location: Co. Durham Posts: 169 |
Would you not consider a battery one, especially if you already have a standard platform such as Dewalt or Milwaukee. I have one and for small jobs I use that over petrol and it has no power leads to worry about. 1997 110 Hi-Cap Keswick Green
1997 90 Truck Cab Blue 1996 Discovery Pickup |
||
3rd Jun 2020 4:45pm |
|
jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8026 |
Or buy a silky. Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
3rd Jun 2020 7:13pm |
|
blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17374 |
For the sizes you mention, I'd use a Silky (but be careful, more arborists cut themselves with Silkys than with chainsaws)!
If you need a leccy one, the Milwaukee M18 FUEL cordless saw is really very, very good indeed, but is top dollar. |
||
3rd Jun 2020 7:17pm |
|
Chopperone Member Since: 13 Nov 2016 Location: Derbyshire Posts: 396 |
Makita make battery ones.
Their pruning saw is almost like a top handle saw but has two handles & uses one battery. However price is the factor again.... Can’t fault their drills & other tools (l use a lot of makita kit) Using 240v outside has it’s issues Guy May your life be like toilet paper ; long & useful. |
||
4th Jun 2020 7:49am |
|
jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8026 |
the worse injury i have is from a silky working at height rather than chainsaw so that proves ^^^^ Cheers James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
4th Jun 2020 8:13am |
|
blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17374 |
Yes, it is a curious statistic but I believe one which is factually correct. I suspect that part of the reason is that everyone knows a chainsaw is dangerous and is therefore fairly careful, but a handsaw, well that can't do any harm, can it? A razor-sharp Silky certainly can, as all those cut left arms when the "cut and chuck" goes wrong prove!
|
||
4th Jun 2020 8:28am |
|
Grenadier Member Since: 23 Jul 2014 Location: The foot of Mont Blanc... Posts: 5808 |
Thank you all. I have a silky, but we’re about to completely landscape our garden and we have a considerable number of trees to get rid of, 15+, some 12m tall, plus many out-of-control 2m bushes. I don’t want to waste a valuable few days with the gardeners doing it. So that’s a lot of arm work I want to avoid as after confinement my right arm is big enough already. Should I have said that?
I’ve chosen the McCulloch (now owned by Husky) 2000W 40cm with cable. I have Makita batteries, but their saws are still expensive and only last 40-60mins. This will be three or four days, all day, so a cable makes sense. Anyway, thanks as ever.... Monsieur Le Grenadier I've not been everywhere, but it's on my list..... 2011 Puma 110DC - Corris Grey |
||
4th Jun 2020 8:43am |
|
jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8026 |
yep cable one makes sense if avoiding the petrol kind. Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
4th Jun 2020 9:06am |
|
Bluest Member Since: 23 Apr 2016 Location: Lancashire Posts: 4209 |
I got a McCulloch petrol one and it's been a quality saw. Only downside is service bits and spares are hard to come by. Get yourself a chain sharpening set (Oregon do a decent one) and touch the cutters up regularly. A sharp chain makes a big difference, especially on lower powered machines. 2007 110 TDCi Station Wagon XS |
||
4th Jun 2020 11:57am |
|
Grenadier Member Since: 23 Jul 2014 Location: The foot of Mont Blanc... Posts: 5808 |
Monsieur Le Grenadier
I've not been everywhere, but it's on my list..... 2011 Puma 110DC - Corris Grey |
||
4th Jun 2020 11:59am |
|
jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8026 |
I Sharpe every two fills. Risers and teeth Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
4th Jun 2020 1:10pm |
|
jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8026 |
Last week was not a good chainsaw week.
Click image to enlarge From a 576xp, not best pleased. Hoping to salvage cylinder. Cheers James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
4th Jun 2020 1:12pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis