Home > Puma (Tdci) > One Shot Grease |
|
|
zephyr4 Member Since: 29 Apr 2018 Location: uk Posts: 31 |
Can I use the one shot grease on my 2007 2.4 puma or are the swivel housings non fillable.
z4 |
||
2nd Dec 2018 8:26pm |
|
landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5729 |
I heat/warm my one shot grease before I inject. I drop it into a jug of hot water before opening it. That way it’s a much easier quicker job
|
||
2nd Dec 2018 11:08pm |
|
zephyr4 Member Since: 29 Apr 2018 Location: uk Posts: 31 |
I am not sure whats in it know if its already been done how do you get the grease out to renew it.
|
||
3rd Dec 2018 10:12am |
|
williamthedog Member Since: 29 Dec 2012 Location: south wales Posts: 3441 |
You can't basically. You can use a cable tie as a dipstick though.
|
||
3rd Dec 2018 10:40am |
|
zephyr4 Member Since: 29 Apr 2018 Location: uk Posts: 31 |
If it has the one shot in will it drain out or is it to thick.
|
||
3rd Dec 2018 5:09pm |
|
MK Member Since: 28 Aug 2008 Location: Santiago Posts: 2422 |
You would need to remove the big seal and some may flow but most of it will stick to internal parts Puma 110" SW
............................................................. Earth first. Other planets later |
||
3rd Dec 2018 5:31pm |
|
zephyr4 Member Since: 29 Apr 2018 Location: uk Posts: 31 |
ok, thanks for the info.
|
||
3rd Dec 2018 6:12pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis