↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Wing top air intake
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Rad666



Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89
United Kingdom 1998 Defender 110 300 Tdi DCPU Keswick Green
Wing top air intake
I dont want a snorkle but was thinking about moving the air intake to the wingtop vent on the drivers side and use a snow cowl. Is this a stupid idea? 🤷🏻‍♂️ And does somone make a mount that the intake hose will join to
Post #731122 25th Sep 2018 3:15pm
View user's profile Send private message View poster's gallery Reply with quote
geobloke



Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410
United Kingdom 
I think and I know someone will correct me if I am wrong, but Nakatanenga do a kit for this. Albeit for the Puma, but I suspect it can be used on an earlier Defender.


EDIT: Here you go: https://www.nakatanenga.de/en/vehicle-equi...-td4?c=312

Mind you, it would not be a difficult thing to fabricate at home or locally...
Post #731124 25th Sep 2018 3:19pm
View user's profile Send private message View poster's gallery Reply with quote
Rad666



Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89
United Kingdom 1998 Defender 110 300 Tdi DCPU Keswick Green
Perfect thankyou and il be making it haha
Post #731127 25th Sep 2018 3:27pm
View user's profile Send private message View poster's gallery Reply with quote
Roy5695



Member Since: 15 Feb 2014
Location: Cornwall
Posts: 1123
United Kingdom 2011 Defender 110 Puma 2.2 XS DCPU Indus Silver

Click image to enlarge

4” pipe from airbox to wing top. Bit of aluminium with an adaptor ring fabbed up with a snow cowl I too. Works lovely. 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html

Instagram - @r22oyp

Roy
Post #731152 25th Sep 2018 5:31pm
View user's profile Send private message View poster's gallery Reply with quote
Rad666



Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89
United Kingdom 1998 Defender 110 300 Tdi DCPU Keswick Green
Beaut, any under bonnet pics?
Post #731153 25th Sep 2018 5:32pm
View user's profile Send private message View poster's gallery Reply with quote
Roy5695



Member Since: 15 Feb 2014
Location: Cornwall
Posts: 1123
United Kingdom 2011 Defender 110 Puma 2.2 XS DCPU Indus Silver
Mines a Puma 2.2 so wouldn’t be of any help to you I’m afraid. 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html

Instagram - @r22oyp

Roy
Post #731181 25th Sep 2018 6:56pm
View user's profile Send private message View poster's gallery Reply with quote
Conan



Member Since: 05 Sep 2016
Location: the danger zone
Posts: 53
Belgium 1996 Defender 90 300 Tdi HT Coniston Green
geobloke wrote:
I think and I know someone will correct me if I am wrong, but Nakatanenga do a kit for this. Albeit for the Puma, but I suspect it can be used on an earlier Defender.


EDIT: Here you go: https://www.nakatanenga.de/en/vehicle-equi...-td4?c=312

Mind you, it would not be a difficult thing to fabricate at home or locally...


Since people on this forum seem more knowledgeable than those on Facebook, I'd like to bounce back on this thread for this question: can this kit (or a diy version) be used to switch the air intake and the heat intake on a LHD Defender 300tdi?

I ask the question because I wanted to install a snorkel with a wing mount, but in order to do this, I would have to switch the two intakes...


Click image to enlarge
Post #731193 25th Sep 2018 7:16pm
View user's profile Send private message View poster's gallery Reply with quote
dantastic



Member Since: 04 May 2010
Location: London
Posts: 367
United Kingdom 
Out of curiosity, what's the benefit of doing this mod? Is it for the shorter run of air or?
Post #731204 25th Sep 2018 7:36pm
View user's profile Send private message View poster's gallery Reply with quote
Conan



Member Since: 05 Sep 2016
Location: the danger zone
Posts: 53
Belgium 1996 Defender 90 300 Tdi HT Coniston Green
in my case, just for the looks. I love those top wing mounted snorkels...
Post #731211 25th Sep 2018 7:47pm
View user's profile Send private message View poster's gallery Reply with quote
Roy5695



Member Since: 15 Feb 2014
Location: Cornwall
Posts: 1123
United Kingdom 2011 Defender 110 Puma 2.2 XS DCPU Indus Silver
Conan wrote:
geobloke wrote:
I think and I know someone will correct me if I am wrong, but Nakatanenga do a kit for this. Albeit for the Puma, but I suspect it can be used on an earlier Defender.


EDIT: Here you go: https://www.nakatanenga.de/en/vehicle-equi...-td4?c=312

Mind you, it would not be a difficult thing to fabricate at home or locally...


Since people on this forum seem more knowledgeable than those on Facebook, I'd like to bounce back on this thread for this question: can this kit (or a diy version) be used to switch the air intake and the heat intake on a LHD Defender 300tdi?

I ask the question because I wanted to install a snorkel with a wing mount, but in order to do this, I would have to switch the two intakes...


Click image to enlarge


Nakatenenga again sell a relocation for the heater/blower intake to the side of the wing. I have just the wing vent but it comes with pipe work and adaptors.

Click image to enlarge 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html

Instagram - @r22oyp

Roy
Post #731229 25th Sep 2018 8:31pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums