Home > Td5 > 110 DC rear seatbelt question |
|
|
CDN38 Member Since: 14 Nov 2014 Location: Courtenay, BC Posts: 729 |
I'm helping a friend of mine with a 110 double cab restore, and we are having issues getting rear seat belts. Being that 10 double cabs are complete UNICORNS here, we have nothing to look at for an example, we're stuck.
The truck had no rear seat belts, and an exhaustive search of Microcat hasn't shed much light on what we need. Looking for part numbers for the bracket, and appropriate seat belt as shown in the photo first photo. Second photo shows the position of what we have. Is the first photo the stock seatbelt setup, or is it a front 110 belt attached to a made up bracket? There was something in the bracket position in out truck at one time by the looks of things... Would really appreciate any photos and / or part numbers. Click image to enlarge Click image to enlarge it's a Landrover thing... my renovation thread: http://www.defender2.net/forum/topic40792.html |
||
7th Jan 2017 6:54pm |
|
mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769 |
I'll try and remember to get a pic tomorrow but our dc is a puma not td5 so I'm not sure if they changed at all. Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
7th Jan 2017 11:53pm |
|
CDN38 Member Since: 14 Nov 2014 Location: Courtenay, BC Posts: 729 |
Thanks Ray! it's a Landrover thing...
my renovation thread: http://www.defender2.net/forum/topic40792.html |
||
8th Jan 2017 12:17am |
|
justinp Member Since: 24 Jun 2016 Location: Cambridge Posts: 167 |
Here are the off side seatbelt parts used in my 2012 110 DC, the centre seat belt is fixed to the seat. Let me know if you're need a photo of the near side.
Click image to enlarge Click image to enlarge Click image to enlarge |
||
8th Jan 2017 3:36pm |
|
Jon110 Member Since: 26 Mar 2016 Location: Newcastle under lyme Posts: 83 |
Had a look at my 110dc td5 and it has the bracket like your 1st photo
|
||
8th Jan 2017 3:52pm |
|
mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769 |
Everyone beat me too it Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
8th Jan 2017 4:58pm |
|
CDN38 Member Since: 14 Nov 2014 Location: Courtenay, BC Posts: 729 |
Any idea on part numbers for the brackets and belts?? Can't find anything in Microcat. (it's a MY2000 110 DC) it's a Landrover thing...
my renovation thread: http://www.defender2.net/forum/topic40792.html |
||
8th Jan 2017 6:50pm |
|
Jon110 Member Since: 26 Mar 2016 Location: Newcastle under lyme Posts: 83 |
Didn't notice any code numbers from the quick look I had today.
Will have another look tomorrow. |
||
8th Jan 2017 8:48pm |
|
CDN38 Member Since: 14 Nov 2014 Location: Courtenay, BC Posts: 729 |
it's a Landrover thing...
my renovation thread: http://www.defender2.net/forum/topic40792.html |
||
8th Jan 2017 8:49pm |
|
Jon110 Member Since: 26 Mar 2016 Location: Newcastle under lyme Posts: 83 |
Could not see a code on the bracket but code on the right rear belt is EVL000080
I have a MY2001 110dc Hope this helps |
||
9th Jan 2017 2:34pm |
|
blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17448 |
In your OP you don't say (as far as I can tell) what year the vehicle in question is.
My 2007 Puma DC has seatbelts exactly like those shown in the first photo, which is the standard configuration for the second row seats and as far as I know is the same for all Puma second rows, whether USW, SW, DCPU or DCHCPU models. Microcat is massively confusing for the parts numbers for belts but as far as I can tell, post VIN 7A000001 thepart numbers for SW, USW, DCPU, DCHCPU and DCCC(130) are EVL501600PMA for the RH belt and EVL501610 for the LH belt. I can find no separate mention of the bracket, so my initial hypothesis is that this is included with the belt. The TD5 part numbers seem to be EVL000080PMA (RH) and EVL000090PMA (LH), but these appear to be radically different to the Puma belts. There are different part numbers listed for post 2007 SW and USW, and DCHCPU and DCCC on some versions of microcat but I am not sure why. There seems to be little sense in the belt assembly being different, though the bracktry between the floor and the chassis will clearly differ between 130 and 110 models. This is a surprisingly muddled area! |
||
9th Jan 2017 4:36pm |
|
CDN38 Member Since: 14 Nov 2014 Location: Courtenay, BC Posts: 729 |
Thanks Blackwolf. It's a MY2001. I have the belts all figured out now, but the bracket is still a mystery...
Yes, surprisingly a lot of confusion in microcat in this one area. it's a Landrover thing... my renovation thread: http://www.defender2.net/forum/topic40792.html |
||
9th Jan 2017 10:01pm |
|
Sancho Member Since: 28 Mar 2017 Location: Winchester Posts: 24 |
Did you find a part number for the bracket? I had the exact same problem recently and I have just bought one of the brackets from Land Rover... after spending an hour with their parts manager going through exploded PDFs!
|
||
20th Apr 2017 10:09am |
|
CDN38 Member Since: 14 Nov 2014 Location: Courtenay, BC Posts: 729 |
Never did find a number, just ended up fabricating a bracket. it's a Landrover thing...
my renovation thread: http://www.defender2.net/forum/topic40792.html |
||
20th Apr 2017 3:56pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis