Home > For Sale & Wanted > [SOLD] Bearmach clear LED number plate lamp BA9715 |
|
|
CarMan Member Since: 29 Nov 2010 Location: Cotswolds Posts: 1862 |
Firstly, please read my previous topic and you will understand why it's for sale!
http://www.defender2.net/forum/topic61251.html Some seem to like 'em and some don't but ideal to fit without plinth (bolts aren't not long enough to fit with plinth) and may or may not require central hole drilling in the tub. Perfect condition and never fitted, though I have drilled a small central hole in the gasket only as shown. Just to help keep the pile of bits in the garage to a minimum I'd like £5.00 please (which I will donate to the forum as I've recently enjoyed quite a few successful small sales here) plus £2.95 to cover postage at cost. So £7.95 including UK postage. PayPal gift or bank transfer please. Must be a bargain for someone but caveat emptor! This is a very genuine sale, but as you will have read I had some issues with fitting it so this may not be for everyone. I was told it came with a 3 year warranty but I'm not offering that I actually feel that it appears quite nice quality, I liked it because it was unbranded and considerably heavier than the Bolt-On-Bits one I now have fitted. Click image to enlarge Click image to enlarge Click image to enlarge Rob 1993 200tdi 90 hard-top 1998 300tdi 90 soft-top 2016 2.2 XS 90 hard-top (sold) Last edited by CarMan on 8th May 2018 5:23pm. Edited 1 time in total |
||
7th May 2018 4:18pm |
|
ericvv Member Since: 02 Jun 2011 Location: Near the Jet d'Eau Posts: 5816 |
Interesting picture that last one. Shows these leds here are probably better quality than the domed ones I thought it would be in this lamp. So my comments in the other thread that the domed leds all too quickly may break down does not apply to this Bearmach lamp here on sale now. This here is a version I have never seen before. Surely someone will take up the challenge to test this new kid on the block.
Eric You never actually own a Defender. You merely look after it for the next generation. http://youtu.be/yVRlSsJwD0o https://youtu.be/vmPr3oTHndg https://www.youtube.com/watch?v=_GtzTT9Pdl0 https://www.youtube.com/watch?v=ABqKPz28e6A https://www.youtube.com/watch?v=rLZ49Jce_n0 https://www.youtube.com/watch?v=XvAsz_ilQYU https://www.youtube.com/watch?v=K8tMHiX9lSw https://m.youtube.com/watch?v=dxwjPuHIV7I https://vimeo.com/201482507 https://www.youtube.com/watch?v=ZSixqL0iyHw |
||
7th May 2018 7:04pm |
|
CarMan Member Since: 29 Nov 2010 Location: Cotswolds Posts: 1862 |
I suspect you are thinking of these which appear to have to have the same part number
|
||
7th May 2018 8:12pm |
|
CarMan Member Since: 29 Nov 2010 Location: Cotswolds Posts: 1862 |
Now sold to BPS, subject to payment.
|
||
8th May 2018 6:20am |
|
CarMan Member Since: 29 Nov 2010 Location: Cotswolds Posts: 1862 |
Payment now received and lamp posted. Donation sent to Martin as promised
|
||
8th May 2018 5:24pm |
|
Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6605 |
Thank you 1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
8th May 2018 5:43pm |
|
ericvv Member Since: 02 Jun 2011 Location: Near the Jet d'Eau Posts: 5816 |
We are all looking forward to BPS reporting of the sequel to the installation saga of this lamp.
Eric You never actually own a Defender. You merely look after it for the next generation. http://youtu.be/yVRlSsJwD0o https://youtu.be/vmPr3oTHndg https://www.youtube.com/watch?v=_GtzTT9Pdl0 https://www.youtube.com/watch?v=ABqKPz28e6A https://www.youtube.com/watch?v=rLZ49Jce_n0 https://www.youtube.com/watch?v=XvAsz_ilQYU https://www.youtube.com/watch?v=K8tMHiX9lSw https://m.youtube.com/watch?v=dxwjPuHIV7I https://vimeo.com/201482507 https://www.youtube.com/watch?v=ZSixqL0iyHw |
||
8th May 2018 5:44pm |
|
Bps Member Since: 14 Feb 2016 Location: Lancashire Posts: 830 |
I’ll start a new thread for the installation 😂
|
||
8th May 2018 6:52pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis