↓ Advertise on Defender2 ↓

Home > Wheels & Tyres > first post - tyre and wheel help
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
jamdesignandbuild



Member Since: 20 Nov 2017
Location: gloucestershire
Posts: 15

United Kingdom 
first post - tyre and wheel help
Hi everyone,

Im looking for some advice please.

Im currently modifying a 90 defender truck. It is a 92 reg and is completely standard.

Ive ordered a full gwyn lewis challenge setup with 2 inch lift and am currently deciding on wheels and tyres.

I ordered these off ebay for £350 in red without thinking too much http://www.lrparts.net/1947defendmb-kahn-d...wheel.html I only ordered as i need red wheels to contrast with my company logo Smile

9 x 16 with a -15 offset


Im now wondering if they are suitable as the kahn website says on and off road use in the heading with a contradictory disclaimer saying not for off road use on another page.


If they are suitable id be open to suggestions on tyres. Its a limited use vehicle, used for towing an excavator on road, forestry work and maybe a bit of off roading.

Any help gladly received before i make another bad choice

Ive been looking at the maxiss trepador but heard not much use on road, so I thought STT Pros maybe.


Last edited by jamdesignandbuild on 26th Nov 2017 11:59pm. Edited 1 time in total
Post #667152 26th Nov 2017 10:18pm
View user's profile Send private message View poster's gallery Reply with quote
camelman



Member Since: 27 Feb 2013
Location: Peak District
Posts: 3373

United Kingdom 
Have a look here: www.extremeoffsetwheels.com/custom%20made.html

I believe what you're looking at are the "5SP" model. 
Post #667172 26th Nov 2017 11:41pm
View user's profile Send private message View poster's gallery Reply with quote
grafty99



Member Since: 15 Aug 2012
Location: North Devon
Posts: 4786

United Kingdom 2002 Defender 90 Td5 HT Caledonian Blue
I would say unless you have extended arches then -15 offset will stick out too far 2002 90 Td5 Station Wagon
1990 Vogue SE
Triumph Tiger Explorer 1200
Td5 90 Thread http://www.defender2.net/forum/topic50767.html
Tdi 110 Thread https://www.defender2.net/forum/topic69562.html
RRC Thread http://www.defender2.net/forum/topic54492.html
Instagram http://www.instagram.com/george_grafton
Post #667173 26th Nov 2017 11:42pm
View user's profile Send private message View poster's gallery Reply with quote
jamdesignandbuild



Member Since: 20 Nov 2017
Location: gloucestershire
Posts: 15

United Kingdom 
I thought that may be the case, extended arches it is then Smile

thank you
Post #667176 27th Nov 2017 12:01am
View user's profile Send private message View poster's gallery Reply with quote
camelman



Member Since: 27 Feb 2013
Location: Peak District
Posts: 3373

United Kingdom 
Depends on the Tyres. I had 285/75/16 on 16x8 ET0 and they were just about flush with the arches.

The maths says a 255 tyre on an ET-15 should therefore fit.

I'm runnin 35/12.5/15 now on ET-33 so defn need the extended arches Smile 
Post #667275 27th Nov 2017 2:13pm
View user's profile Send private message View poster's gallery Reply with quote
DSC-off



Member Since: 16 Oct 2014
Location: North East
Posts: 1428

United Kingdom 2015 Defender 110 Puma 2.2 XS CSW Aintree Green
This probably isn't the advice you want to hear.
If you tow an excavator on road regularly with a 90, I guess the trailer isn't light, then a different vehicle set up may be more suitable.

Suspension - The Gwyn Lewis challenge kit is very good for extreme off road and competition use, but it won't improve the handling and stability on road over a well maintained standard set up. Standard Landrover suspension is designed to carry loads and tow trailers.

Big wheels, large offsets and extreme tyres (Trepador's) are also not going to do anything for the on road handling. This is all well and fine for competition vehicle, or play thing, but again I wouldn't recommend any of those to tow trailers.
Kahn wheels? If they can't decide if they're suitable for off road use or not, they're probably best avoided - like all things Kahn Rolling Eyes
Don't go too big on tyres they will affect the gearing too.

The image of a standard truck probably isn't what you want, but may be more suitable for it's job.
Post #667363 27th Nov 2017 7:09pm
View user's profile Send private message View poster's gallery Reply with quote
jamdesignandbuild



Member Since: 20 Nov 2017
Location: gloucestershire
Posts: 15

United Kingdom 
I may have got a bit carried away with it all Smile. I think I may have to buy a tow bar for the wifes barbarian and just have the defender as a toy. Unless I can convince the wife to have a 110 truck.

Kahn have issued an email saying its a standard print on all web pages and the wheels are suitable for off road use.

I will avoid trepadors as Im keen for some on road use. Gwyn has said on road performance will not suffer with his kit.

will 265 / 75 / 16 be ok with 2 inch wider arches to accomodate the -15 offset or should i be looking for something smaller

thank you
Post #667416 27th Nov 2017 10:27pm
View user's profile Send private message View poster's gallery Reply with quote
jamdesignandbuild



Member Since: 20 Nov 2017
Location: gloucestershire
Posts: 15

United Kingdom 
think i need some extended arch research tonight
Post #667417 27th Nov 2017 10:29pm
View user's profile Send private message View poster's gallery Reply with quote
DSC-off



Member Since: 16 Oct 2014
Location: North East
Posts: 1428

United Kingdom 2015 Defender 110 Puma 2.2 XS CSW Aintree Green
BF Goodrich recommended rim width is 7 to 8" for a 265/75/16 AT-KO2 tyre.
285/75/16 would be OK on 9", recommend width is 7.5 to 9"
Different manufacturers and tread types may vary a bit.

Sorry, I can't comment on wider arches, not used them.
Post #667431 27th Nov 2017 11:36pm
View user's profile Send private message View poster's gallery Reply with quote
camelman



Member Since: 27 Feb 2013
Location: Peak District
Posts: 3373

United Kingdom 
Almost all of the wider arch kits will require you to drill half a dozen holes in each wing to take the mounting screws.
The most popular ones tend to the Terrafirma +50mm plastic arches (£150+/-) although there are cheaper fibreglass versions.
Above that price range are the 'Spectre' style ones but you're looking at £5-600 quid. 
Post #667434 27th Nov 2017 11:57pm
View user's profile Send private message View poster's gallery Reply with quote
jamdesignandbuild



Member Since: 20 Nov 2017
Location: gloucestershire
Posts: 15

United Kingdom 
i dont think i can justify 600 on a wheel arch kit Smile.

thanks for the input on tyres, i need to get some asap now.

Am i best going for a 75 or 85 though?????
Post #667646 28th Nov 2017 9:12pm
View user's profile Send private message View poster's gallery Reply with quote
AJC



Member Since: 30 Nov 2015
Location: Lancashire
Posts: 1364

United Kingdom 
I'd rather change my wheel deisgn tat fit extended arches, I personally can't stand the look of them
Post #667661 29th Nov 2017 4:09pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums