 | Home > Td5 > TD5 90 auto conversion |
 
|
|
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101   
|
Finally collected the last few parts of the puzzle for my auto conversion.
NAS centre console and compushift.  Click image to enlarge |
||
4th Mar 2011 8:30pm |
|
| 555SUB Member Since: 21 Feb 2009 Location: Shropshire Posts: 17 
|
where did you get the parts from?
|
||
|
4th Mar 2011 8:38pm |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101
|
internet, ashcrofts and associates
|
||
|
4th Mar 2011 8:40pm |
|
| diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6124  
|
Nice! keep us posted Marcus!
 |
||
|
5th Mar 2011 10:24am |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101
|
will do jamie, might even need a hand! |
||
|
5th Mar 2011 10:27am |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101
|
So i got out of the house for an hour this afternoon and decided to fit the gearbox sensor boss into the hp22 sump.
Click image to enlarge Got the sump off and positioned the boss in a place that will hopefully be quite well protected. Click image to enlarge The gearbox is pretty clean but the filter needs a change. Lets hope it's up to the job! Click image to enlarge Back in place, it fits between the filter and the gearbox mech. Not alot of room to mount the probe inside the sump. Click image to enlarge back on the gearbox. Not bolting it down hard as it'll be off again when she's the right way up and installed. Next job is to strip the 90 out, when i get 5 mins. |
||
|
5th Mar 2011 7:20pm |
|
| jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8156  
|
Marcus, what did you pay for the box out of interest? did you get a 4.6 one or a std one and then a bigger TC? Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
|
5th Mar 2011 7:39pm |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101
|
std HP22e with a uprated TC, i've uprated the TC i my D2 and the improvement is quite substantial. When i get some serious HP out of my td5 i expect i'll get it rebuilt to HP24 spec. The extra length you spoke about put me off the HP24 for now. As for cost, i was a VERY good deal |
||
|
5th Mar 2011 7:50pm |
|
| jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8156
|
you had one straight from Dave then? was just looking at ebay ones for mine and wanted to know what they were going for! Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
|
6th Mar 2011 8:07pm |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101
|
no i bought the box, compushift off smo. going rate box a box is about £350 i'd say |
||
|
6th Mar 2011 10:02pm |
|
| 555SUB Member Since: 21 Feb 2009 Location: Shropshire Posts: 17
|
Ashcrofts are out of stock of Auto / NAS Defender consoles.....
do you know anywhere else can get 1 from |
||
|
8th Mar 2011 9:31pm |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101
|
sorry, i put a wanted ad up on the net and i had a reply.
tbh you can do without qite nicely once you get your headaround the layout of the auto shifter. imo the NAS console isn't worth what they charge for it. |
||
|
9th Mar 2011 5:38pm |
|
| ashtrans Site Sponsor Member Since: 08 Nov 2008 Location: Harpenden Posts: 259
|
I agree, it's an expensive bit of plastic but not as crazy as the genuine ones which were nearer £ 600 when they were available, we now have some in stock, Dave |
||
|
11th Mar 2011 1:19pm |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101
|
Not a pop at you and yours David, just reporting that for £300 odd pounds you get a centre console! Regardless of the fact the LR take the double  at £600 odd!
I paid less than the cost of a genuine NAS console for all my parts....maybe that puts it into context?  |
||
|
11th Mar 2011 7:36pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
