DEFENDER2.NET - View topic - I've inadvertantly coverted my 110usw into a 3 seater

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > I've inadvertantly coverted my 110usw into a 3 seater

Page 1 of 1

Print this entire topic ·

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6298

2011 Defender 110 Puma 2.4 XS CSW Stornoway Grey

I've inadvertantly coverted my 110usw into a 3 seater

I've dropped 2 of the back seats (simply folded down the backs) and now they won't go back up cos the seat belt has jammed on the middle seat preventing it from folding back up ......any thoughts please?

3rd Nov 2017 12:51pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

How irritating.

How about undoing the upper mount bolt? should be just a plastic cap over the head of the bolt. 17/19mm IIRC.

Good luck

3rd Nov 2017 1:42pm

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6298

thanks for the note. unfortunately this is the middle seat / seat belt that's causing the problem and as such I don't think what you've suggested is an option.

blo*dy annoying. supposed to be giving someone a lift later too.

3rd Nov 2017 3:32pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

Ok, same advice then but the lower seat belt mount.

It will either be a nut under the floor panel or a bolt and captive nut.

Out of interest what age Defender is it?

3rd Nov 2017 8:45pm

JOW240725

Member Since: 04 May 2015
Location: Suffolk
Posts: 7905

2012 Defender 110 Puma 2.2 XS CSW Orkney Grey

I struggle with our middle seats sometimes although sounds a different issue. I generally find walking away and trying again another day works

James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers

3rd Nov 2017 9:52pm

leeds

Member Since: 28 Dec 2009
Location: West Yorkshire
Posts: 8581

Well our 300 TDi CSW has gone from a 12 seater to a perrmanent 2 seater.

Our 2015 110 USW has gone from 5 seats to 2 seats.

Well it has gone from a 5 seater to a 2 seater as someone had a need to borrow the three seats in the back. if things go to plan it will be going back to a 5 seater.

Brendan

3rd Nov 2017 10:47pm

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6298

thanks guys - sorted.

IRB & co removed the seat base and removed the seat belt anchor point which released the seatbelt and hence got the seat back up.

it would appear that the little plastic thing on the seatbelt which I can only assume is to prevent the belt retracting too far got stuck somehow / somewhere around where it retracts into the seat?

like I say sorted now. I think the answer is to introduce some slack before dropping the seat backs

what a fiddle.....just like the rest of the car

3rd Nov 2017 10:50pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum