![]() | Home > Tdi > Tips and tricks - Thermostat water heater tube 300TDI |
![]() ![]() |
|
|
g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967 ![]() ![]() |
lots of plus gas, a deep six sides socket! try nipping it up a little tighter first as this can sometimes break the rust.
or maybe an impact gun on it. My 109 thread my youtube channel |
||
![]() |
|
g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967 ![]() ![]() |
oops just read yours doesn't have a hex
![]() a picture might be useful My 109 thread my youtube channel |
||
![]() |
|
TDCi Guy Member Since: 17 Aug 2014 Location: Yorkshire Posts: 286 ![]() ![]() ![]() |
Good set of mole grips? Drill a hole all the way through and use a screwdriver to get some leverage? Tom
@tditomprice 100” Defender Hybrid 2010 Alaska White 90 HT |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
