 | Home > Maintenance & Modifications > MUDSPORT MUDRAILS |
 
|
|
|
| NCTT Member Since: 07 Apr 2008 Location: ESSEX Posts: 229  
|
hi ive done a searh and found a few bits on exmoor , but ive ordered one of these ( drivers side only )
any tips to fit them ( puma ) and how long do they take ? cheers |
||
11th Feb 2011 9:57am |
|
| szracer Member Since: 10 Oct 2010 Location: Cotswolds Posts: 356  
|
No real tip needed - They're a piece of p*ss to fit, but..
Remove seat base, disconnecting heated seat plugs (if fitted) Undo and remove existing bolts from front of seats rails. Slide seat forward on rails. Remove rear bolts to runners Lift off seat. Bolt down front of new mudrails, using new bolts supplied (don't tighten fully). Bolt down rear of mudrails. Bolt back of seat runners to mudrails Slidfe seats backwards, Bolt down front of seat runners. Tighten front mudrail bolts (through hole in mudrails). Replace seat base. Total time, 15 mins. to 30 mins. maximum, even for a mechanical dyslexic like me!
2010 110 XS USW (the slow one) 1960 Alfa Romeo Giulietta SZ (the fast one) 2005 Ducati ST3 1954 Sunbeam S8 |
||
|
11th Feb 2011 11:35am |
|
| NCTT Member Since: 07 Apr 2008 Location: ESSEX Posts: 229
|
LEGEND , thanks vm buddy
|
||
|
11th Feb 2011 11:37am |
|
| NCTT Member Since: 07 Apr 2008 Location: ESSEX Posts: 229
|
FITTED THIS MRNG , WITH CRACKING HANGOVER , V V EASY , THANKS BUD !!
|
||
|
13th Feb 2011 7:41pm |
|
| szracer Member Since: 10 Oct 2010 Location: Cotswolds Posts: 356
|
No probs. Glad it worked.
James
2010 110 XS USW (the slow one) 1960 Alfa Romeo Giulietta SZ (the fast one) 2005 Ducati ST3 1954 Sunbeam S8 |
||
|
14th Feb 2011 12:00am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
