DEFENDER2.NET - View topic - hi/lo linkage spacer

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > hi/lo linkage spacer

Page 1 of 1

Print this entire topic ·

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6293

2011 Defender 110 Puma 2.4 XS CSW Stornoway Grey

hi/lo linkage spacer

Hi,

as the title suggests. on the transfer box there's a linkage for the hi/lo selector. in the LR hand book it refers to this linkage length being set with a spacer tool.

does any know if this actually gets used typically and what symptoms you'd expect if it wasn't set correctly / very well?

many thanks,

27th Jul 2017 1:40pm

zsd-puma

Member Since: 09 Aug 2016
Location: Kent
Posts: 2720

2010 Defender 110 Puma 2.4 USW Santorini Black

I did mine without it. It basically just makes sure the lever is in the High position when the box is in high. You can see on the bottom of the lever there is another lever it basically just cetralises that.

28th Jul 2017 3:31pm

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6293

Thank you zsd. As you've suggested i'm inclined to think it's not necessary and i've determined my concern (hence question) lies with the diff lock and not hi/lo. Thanks all the same.

28th Jul 2017 3:54pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum