 | Home > Puma (Tdci) > load space mats |
 
|
|
|
| walfy Member Since: 29 Aug 2007 Location: Frome Posts: 2661  
|
Not sure of the dimensions you want but I had a 90XS and the rear load space mat was best part of a hundred quid, so give or take $200. So not far off the mark.
IIRC it has mouldings to go round the feet for the 3rd row seats 110 D250 SE HT 110 USW SOLD RRE HSE Dynamic Gone, wife killed it VOLVO XC60 R Dynamic with some toys Polaris RZR 900XP SOLD |
||
15th Sep 2008 8:52pm |
|
| dm_td5 Member Since: 20 Jul 2008 Location: Arnhem Land Posts: 609  
|
I've measured it all out so I can put extra matting in (and not spend several hundered dollars on the load mat), but don't have the figures handy (or the Defender). If I remember I'll post up the measurements in the next couple of days - if I don't PM me a reminder. 110 2.4TDCi
110 300Tdi 
LROCV ::: AULRO.com |
||
|
16th Sep 2008 7:23am |
|
| Eduardo Member Since: 28 Aug 2008 Location: Región Metropolitana Posts: 2110  
|
Let's me measure the mat today and I will post the figures tomorrow.
regards Eduardo MY 2007 110 SW PUMA 2.4: Big Fog of 64' MY 1994 Jayco 1207 Folding camper: "El Tremendo" Click image to enlarge |
||
|
16th Sep 2008 1:37pm |
|
| solmanic Member Since: 16 Aug 2007 Location: Brisbane Posts: 191 
|
I have a PDF of the fully measured & dimensioned rear load space area I did when I made up my mats. It's a folded-flat view of all the surfaces. PM me and I'll email you the file. 2007 Defender 110
1970 Alfa Romeo 1750GTV |
||
|
16th Sep 2008 11:21pm |
|
| spudfan Member Since: 10 Sep 2007 Location: Co Donegal Posts: 4695 
|
I have a Tdci with the extra rear seats.As far as I know Land Rover do not do a mat for the rear load space.I bought on of the inexpensive rubber mats that Paddocks sells.It is slightly too long but is easily trimmed around the floor mounting fixture for the middle row seats.You must cut out little grooves where the rear seats fold down to the floor. My wife did mine with a scissors.It really looks the part.
Alternatively you could buy two mats for the middle footwell and put them in the back longitudinally.This does leave a sizable gap around the edges and is a lot more expensive. |
||
|
25th Sep 2008 5:35pm |
|
| mse Member Since: 06 Apr 2008 Location: UK Posts: 5038  
|
The genuine mats are good quality (to be honest - as everying genuine is) but they are expensive.
They do do complete mats for all Mike |
||
|
25th Sep 2008 6:19pm |
|
| TJ101 Member Since: 30 May 2007 Location: Taunton Somerset Posts: 3750  
|
All the mats on Puma, are different to previous td5,,
Front foot-wells Second seat row,(110), (but the TD5 one fits in mine !!  )
Rear load area As stated, good quality, with sides to retain a small about of wet,,(whether from boots or water leaks WALFY !!!) Have always worked a set into the deal, when buying  California F1, 75th 110 "Kermit", 50th Ann V8, 90 V8 Hybrid, 55 Series 1
Main Brian James Trailer Dealer for South West UK |
||
|
25th Sep 2008 6:33pm |
|
| jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8049 
|
mine were thrown in with the deal.
but i think mines coming with the rear load mat for one with seats and i opted out of the seats so if that doesnt work i will scour the pile of rear D3/RRS/RRV rear mats and see what fits can then let you all know! Cheers James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
|
2nd Oct 2008 6:39pm |
|
| TJ101 Member Since: 30 May 2007 Location: Taunton Somerset Posts: 3750
|
While you are their,, If any left, after Walfy and myself had a rummage !! 
Could do with a better one for the rear of the Sport  California F1, 75th 110 "Kermit", 50th Ann V8, 90 V8 Hybrid, 55 Series 1
Main Brian James Trailer Dealer for South West UK |
||
|
2nd Oct 2008 7:32pm |
|
| jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8049
|
Sport ones are limited i know that and the silver logo bit has come off most of them but will look when next in Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
|
2nd Oct 2008 7:53pm |
|
| TJ101 Member Since: 30 May 2007 Location: Taunton Somerset Posts: 3750
|
Mmm, Sounds the sames as what i have then,, the silver metal strip working loose !!! California F1, 75th 110 "Kermit", 50th Ann V8, 90 V8 Hybrid, 55 Series 1
Main Brian James Trailer Dealer for South West UK |
||
|
2nd Oct 2008 7:59pm |
|
| walfy Member Since: 29 Aug 2007 Location: Frome Posts: 2661
|
What that pile of rubbish in "the shed". Tim and I didn't see anything worth having there 110 D250 SE HT 110 USW SOLD RRE HSE Dynamic Gone, wife killed it VOLVO XC60 R Dynamic with some toys Polaris RZR 900XP SOLD |
||
|
2nd Oct 2008 8:04pm |
|
| jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8049
|
remind me not to offer any then! or alloys for that matter! Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
|
2nd Oct 2008 8:06pm |
|
| TJ101 Member Since: 30 May 2007 Location: Taunton Somerset Posts: 3750
|
You talking to him or me I didn't say a word !!! California F1, 75th 110 "Kermit", 50th Ann V8, 90 V8 Hybrid, 55 Series 1
Main Brian James Trailer Dealer for South West UK |
||
|
2nd Oct 2008 8:09pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
