DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > A Frame Bushes

Page 1 of 1

Print this entire topic ·

noworries4x4

Member Since: 24 Dec 2010
Location: Newton Abbot Devon
Posts: 1195

A Frame Bushes

Just done a search on here re the above as my rear end has all gone wobbly

scarry actually as mine is set up with heavy anti rollbar. I popped my head under last night with a pry bar and the drag links seem fine anti rollbar a little worm but nothing to bad, i never got right under as it was propped on a forklift at work.

Question ?? After reading on here they have changed the mounts to welded ones how do you change the bushes now, i used to just unbolt the lot off the crossmember.

Also whats the best bush to put back in (heavy heavy duty) towing every day

Thanks If everything is under control you are not going fast enough.

Every Day 16 MY Discovery 4 Commercial Workshop and Escort Vehicle
Weekends 07MY L322 TDV8 Vogue SE
Series 1 80" 3ltr 6cyl with overdrive
No Worries 4X4

10th Feb 2011 8:40pm

MK

Member Since: 28 Aug 2008
Location: Santiago
Posts: 2447

2007 Defender 110 Puma 2.4 SW Chawton White

So yours have the welded bracket. You should just take the bolt and nut off and drop both arms. I think superpro bushes have 3 years warranty. Puma 110" SW

.............................................................
Earth first. Other planets later

10th Feb 2011 10:00pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum