↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Unwin cargo rails fitted.
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Baz8046



Member Since: 08 Feb 2016
Location: Chatham
Posts: 81
United Kingdom 2002 Defender 90 Td5 HT Rutland Red
Unwin cargo rails fitted.
After getting tired of everything in the back rolling around I decided to fit some cargo rails at the weekend.
Unwin seemed a good choice and are widely available.
You can then get the cargo loops that will fit anywhere on the rail.
There is also a rubber cover that slots in when they are not in use to stop anything catching in the rail.
The only down side is you have to drill a few more holes in the floor but not the end of the world.
I drilled mine straight through the floor mat and will trim the bolts underneath when I get chance.


Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge Defender Td5 Commercial 2002
Range Rover L322 TDV8 Westminster 2012
Discovery 4 SDV6 Landmark 2016
Post #624710 16th May 2017 8:07pm
View user's profile Send private message View poster's gallery Reply with quote
Sadi



Member Since: 23 Jul 2015
Location: Windhoek
Posts: 334
Namibia 2016 Defender 110 Puma 2.2 Heritage Edition SW Grasmere Green
"M" bolt size ...
What size & length bolts did you use?

Thanks.
Post #624793 17th May 2017 8:55am
View user's profile Send private message View poster's gallery Reply with quote
RoddyK05



Member Since: 08 Apr 2015
Location: Inverclyde
Posts: 633
Scotland 2004 Defender 90 Td5 SW Yellow
Same style of tracking used in our Ambulances, it takes a good beating and lasts for years. I've only ever seen it wear out on one vehicle - the mechanic just turned it round and put the worn end at the front of the saloon and put the unused end at the back of the vehicle where all the chairs etc get clamped to. If you need that sort of thing it will serve you well. Just make sure there are no wee stones etc in the track or your clamps etc won't go in.
Post #624908 17th May 2017 5:29pm
View user's profile Send private message View poster's gallery Reply with quote
Baz8046



Member Since: 08 Feb 2016
Location: Chatham
Posts: 81
United Kingdom 2002 Defender 90 Td5 HT Rutland Red
The bolts were M8 x 75mm with counter sunk heads to fit the rail.
They are too long for just bolting through the floor but are just right when you have to go through a a strengthener.
I bought the bolts with the rail as a kit.
The rails and bolts were about £60 and the fixing rings an extra £20. Defender Td5 Commercial 2002
Range Rover L322 TDV8 Westminster 2012
Discovery 4 SDV6 Landmark 2016
Post #624993 17th May 2017 9:35pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums