Home > Maintenance & Modifications > Aluminium plate/trim for auto box interior |
|
|
miker Member Since: 13 Sep 2015 Location: Surrey Posts: 1762 |
Never seen anything advertised, but it wouldn't be too hard to make something, or draw it up and have it lasercut.
|
||
13th Feb 2017 7:18pm |
|
Romadog Member Since: 07 Jul 2011 Location: Powys Posts: 1749 |
You shouldn't need it if using Asncroft Centre console.
The owner may have the hole in the console for the Disco 2 type selector and has therefore needed to cover the holes not filled by the selector shown. The top mayalso have been damaged or had switch holes cut into it which are now redundant. Also note decal on operating the transfer box is stuck on the side by drivers seat rather than on the cover for access to fusebox. http://www.ashcroft-transmissions.co.uk/de...o-kit.html http://www.ashcroft-transmissions.co.uk/de...o-kit.html |
||
13th Feb 2017 7:23pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis