 | Home > Technical > Viscous fan, how to remove? |
 
|
|
|
thing keeps turning on the belt...
| RobKeay Member Since: 19 Jul 2009 Location: Stafford Posts: 1585   
|
I got a cheap tool out of halfords.
|
||
23rd Jul 2015 5:34pm |
|
| o4dn Member Since: 08 Jan 2010 Location: South West Posts: 545  
|
Yeah, but ... Halford is a tad far for me
 |
||
|
23rd Jul 2015 5:47pm |
|
| ian series 1 Member Since: 17 Nov 2014 Location: south Posts: 3127 
|
If you have no tool to do it with, you can give the nut a very sharp tap with a chisel, or punch on the very edge.
They usually spin off ok  80" 80" 86" 88" 90"
Wanted, Forward Control Anything considered. |
||
|
23rd Jul 2015 6:04pm |
|
| munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558 
|
Yep long chesil and sharp tap normally does it ok
|
||
|
23rd Jul 2015 6:22pm |
|
| RobKeay Member Since: 19 Jul 2009 Location: Stafford Posts: 1585
|
Oh sorry didn't see your flag. Like the others said it can be done with a sharpe whack with a chisel.
|
||
|
23rd Jul 2015 7:35pm |
|
| o4dn Member Since: 08 Jan 2010 Location: South West Posts: 545
|
No worries! Actually, if you had a reference or even a picture (or maybe a link on Halfords' website), maybe I could try to find it around here, who knows
 |
||
|
23rd Jul 2015 8:16pm |
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5852 
|
One a bit like?
http://www.ebay.co.uk/itm/Land-Rover-36mm-...3ceb0d5d72 1999 Defender TD5 110 Regards John M0VAZ Econet Station 48 no clock |
||
|
23rd Jul 2015 8:21pm |
|
| o4dn Member Since: 08 Jan 2010 Location: South West Posts: 545
|
Nope, that one I have, it's the pulley holding spanner that I'm missing
|
||
|
23rd Jul 2015 8:35pm |
|
| o4dn Member Since: 08 Jan 2010 Location: South West Posts: 545
|
Currently considering ordering this:
http://www.lasertools.co.uk/item.aspx?cat=1153&item=7774 Would that do the job? |
||
|
23rd Jul 2015 8:43pm |
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5852
|
Ahh this one then, 6 pic down
http://www.dingocroft.co.uk/acatalog/Tools2002-p3.html 1999 Defender TD5 110 Regards John M0VAZ Econet Station 48 no clock |
||
|
23rd Jul 2015 8:44pm |
|
| o4dn Member Since: 08 Jan 2010 Location: South West Posts: 545
|
Yes, exactly, but ... a cheaper alternative
|
||
|
23rd Jul 2015 8:51pm |
|
| o4dn Member Since: 08 Jan 2010 Location: South West Posts: 545
|
Thanks all for the replies
I'll keep the chisel as a last option (I'd rather avoid damage), meanwhile I've ordered a couple of adjustable pulley holding tools from the interweb and I'll see how it goes. Or else I'll pay a visit to LR, they must have the right tool for the job 
I'll post the results if that can help others. |
||
|
24th Jul 2015 6:43am |
|
| pj2106 Member Since: 20 Dec 2012 Location: Huntingdon AKA The Shire Posts: 1500 
|
I just brought a set of spammers from flat dog to do mine 😀 2008 110 2.4 XS Utility (Hagrid)
2002 90 TD5 Hardtop (Sully) Sold 1998 300TDi D1 (Billy) Sold |
||
|
24th Jul 2015 8:22am |
|
| Clive Member Since: 21 Mar 2014 Location: Littleborough Posts: 467 
|
A while ago I needed on in a hurry, so I made my own -
 Click image to enlarge It's just a length of 50mm wide x 6mm thick strip steel I had kicking around in the garage, used a 44mm hole saw for the cut-out and 12mm drill for the holes to slip over the pulley bolts, works a treat
I later added the smaller cut-out at the other end (40mm) for the Disco 3 fan. |
||
|
24th Jul 2015 9:46am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
