 | Home > Maintenance & Modifications > Positioning of Lazer light RS-4 lights |
 
|
|
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10731  
|
Cant you just buy some new headlights to replace the ones on there now ? Imo the front of your landy looks great as it is and would not change it
 1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
17th Nov 2016 10:06pm |
|
| Sulisuli Member Since: 30 Oct 2016 Location: South west Posts: 4795  
|
I guess thats a very sensible option, but I am a bit nervous that if I buy a pair of £600+ LED replacement headlights that the lights wont be any better to be honest and then I would be going down the Lazer light route as well.
If I went down the new headlight route I would like DRLs so what makes / options do you folks suggest? 2015 HT XS 90 2008 SVX 90 2000 XS TD5 90 |
||
|
17th Nov 2016 10:16pm |
|
| RoddyK05 Member Since: 08 Apr 2015 Location: Inverclyde Posts: 633  
|
I'm toying with getting a pair of RS4s, and my idea was to mount on top of the bumper below headlights. Only thing is, I usually stand on the bumper at that spot when getting onto the bonnet to access the front of the roof rack. I suppose I could try and avoid standing on the new and expensive lamp? Under bumper would look good I think, but possibly prone to impact damage if I were ever to venture off road with it, but that's unlikely.
Look up posts about the RS4 on here, I'm sure I saw a silver 110sw with them mounted on the bumper, but can't remember who owns it. Last edited by RoddyK05 on 18th Nov 2016 10:24pm. Edited 1 time in total |
||
|
17th Nov 2016 10:20pm |
|
| Stacey007 Member Since: 25 Sep 2015 Location: Cheshire Posts: 3743
|
Hello
I like the idea of one single one under grille in middle (larger one) Or some one fitted it behind the mesh under the lower grille and looked great. Under bumper not keen.... Also wait until this next week 'black Friday' if your buying 2 a nice discount could be had.... |
||
|
17th Nov 2016 10:37pm |
|
| Morepower Member Since: 08 Jan 2013 Location: Fife, Scotland Posts: 630 
|
I have a set of these to fit to my Bowler 90... Some things to note (On the Bowler anyway)... The grill will need to be cut to enable the lights to fit without overhanging the bumper to much. (on a truck with A/C anyway)
With regards LED headlamps, Our 110 has a set of Noldens (supplied by Brendan at 4x4 Overland) and they are great, However they need careful setup to get the best out them.. i.e alignment... I believe Brendan also supplies a small headlamp loom that enables the high beam function to use both lo/high headlamp outputs... This is on my shopping list next as you can never have too much light... Hope this helps, and feel free to drop me a pm if you want to ask anything further Regards Tim It doesn't matter how bad it is, It can always get worse... 2013 Bowler 110 (Sold) 2016 Bowler 90 Rally Spec (Sold) |
||
|
18th Nov 2016 7:23am |
|
| ken Member Since: 18 Aug 2009 Location: Banging Birds with my bitches !! Posts: 4328
|
 Click image to enlarge Simples |
||
|
18th Nov 2016 8:49am |
|
| Mjibex Member Since: 21 Mar 2013 Location: Reading Posts: 283 
|
https://www.devon4x4.com/defender-d44-club...46053.html
Click image to enlarge |
||
|
18th Nov 2016 3:13pm |
|
| Albion Member Since: 08 Dec 2014 Location: Oxfordshire Posts: 141 
|
RS-4's In the bumper, ST-8's on the rack
Click image to enlarge |
||
|
18th Nov 2016 3:41pm |
|
| davew Member Since: 02 Jan 2012 Location: North Yorkshire Posts: 888 
|
Ours work really well on the top of the winch bumper, slightly set back from the edge so the bumper will hit anything first !
Click image to enlarge http://www.yorkshireoffroadclub.net/ |
||
|
18th Nov 2016 4:21pm |
|
| Riverboy Member Since: 16 May 2016 Location: French sector, Earth Posts: 1288 
|
Or go the whole hog and have RS-4s in the grill, ST-4s inset into the bumper and a Triple-R 24 up top
Click image to enlarge and then stick a couple of T2s on the rear so you can see going backwards 
I think you can see me from space  |
||
|
18th Nov 2016 4:34pm |
|
| davew Member Since: 02 Jan 2012 Location: North Yorkshire Posts: 888
|
... and when you have oncoming traffic and turn onto dipped beam it's like you've driven into a black hole !
 http://www.yorkshireoffroadclub.net/ |
||
|
18th Nov 2016 4:52pm |
|
| miker Member Since: 13 Sep 2015 Location: Surrey Posts: 1762 
|
I do love the Laser lights, just can't justify the price to myself!
|
||
|
18th Nov 2016 5:24pm |
|
| Riverboy Member Since: 16 May 2016 Location: French sector, Earth Posts: 1288
|
Not really no. My LED headlights are pretty good on dipped beam. |
||
|
18th Nov 2016 5:45pm |
|
| VeeTee Member Since: 06 Mar 2011 Location: Somewhere Posts: 1512 
|
I noticed these headlights in your previous thread. They look like these, which are american spec, DOT approved, however I doubt if they are E marked and thus would be road legal in Europe... Very nice motor! Cheers, Vincent
1959 Polynorm 1/4 Ton Trailer, Olive Drab Green (sold) 1970 M416 Military Trailer (Camping Trailer Conversion), Epsom Green (sold) 1975 Series III 88 V6, Light Green (sadly sold) 1996 Defender 110 CSW 300 Tdi, Epsom Green (sold) 2000 Freelander 1 TD4 3-drs, Silver (sold) 2006 Freelander 1 TD4 5-drs Facelift Automatic, Tonga Green (sold) MySite |
||
|
18th Nov 2016 5:50pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
