Home > Wheels & Tyres > Help with the Offset. |
|
|
leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8582 |
I am guessing that 0910 means it was made in September 2010
To measure offset, place the rim on flat ground with a long straight edge on. Measure distance from ground and then halve that measurement. Will give you centre line. Measure from back of wheel bolt plate to straight edge. Difference between the two measurements will give you offset. HTH Brendan |
||
23rd Oct 2016 7:50pm |
|
L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10781 |
Many thanks Brendan 1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
23rd Oct 2016 8:17pm |
|
GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10383 |
Offset...much confusing!!
When I ordered my Blindo's , I asked for 'the one that stuck out the most!' |
||
23rd Oct 2016 8:29pm |
|
L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10781 |
Would have been easier if i could of GREENI 1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
23rd Oct 2016 9:04pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis