DEFENDER2.NET - View topic - Chassis seat brack position

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Chassis seat brack position

Page 1 of 1

Print this entire topic ·

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

1998 Defender 110 300 Tdi DCPU Keswick Green

Chassis seat brack position

Click image to enlarge
Can anyone have a look under there 110 puma and measure the these please, i can use the too seat mount to get the spacing between the brackets, i just need to know the position on the crossmember to mount them.

Cheers
Rad

30th Sep 2016 12:27pm

Justtellme

Member Since: 23 Nov 2015
Location: Ottawa
Posts: 310

Did you get a response?
I'm looking for the same info!
Patrick

12th Oct 2016 9:18pm

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

Nop knowbody can be araed haha, think il have to find a random parked one and have a look

12th Oct 2016 9:32pm

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4225

2007 Defender 110 Puma 2.4 XS CSW Java Black

Mine is raised up on stands on the drive at the minute so could measure it in the next couple of days if it stops raining for ten minutes. How easy is it to get a tape to those holes and how accurate does the measurement need to be? You could come and measure it yourself if you are anywhere near. 2007 110 TDCi Station Wagon XS

13th Oct 2016 7:55am

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

Im miles away from you sadly and it should be fairly easy to get too and measurment with a tape would do as the holes for the seat bracket allow for abit of movement

13th Oct 2016 7:58am

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4225

I need to touch up a few bits of underseal on Saturday morning, I'll do it then. 2007 110 TDCi Station Wagon XS

13th Oct 2016 8:04am

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4225

Hope you still need this. Lay in a puddle underneath now! It's 57mm from the right hand bolt to the right hand holes. Centre to centre-ish... Looks symmetrical so same on the left. Bear in mind this,was done with a tape measure! 2007 110 TDCi Station Wagon XS

16th Oct 2016 2:25pm

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

Thank you very much, im doing the job today

17th Oct 2016 7:03am

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

All sorted cheers

17th Oct 2016 6:36pm

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4225

Glad to be of service

2007 110 TDCi Station Wagon XS

17th Oct 2016 7:42pm

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

Click image to enlarge

18th Oct 2016 6:33am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum