Home > Maintenance & Modifications > Gylnn Lewis mud shields set 3! |
|
|
familymad Member Since: 13 Dec 2011 Location: Bucks Posts: 3479 |
http://www.gwynlewis4x4.co.uk/product/land...er-shield/
I have the rear of front wheel and also the rear of rear wheels ones. Has anyone done these shields and can rate? Thanks[/img] 1951 80" S1 2.0 1995 110 300TDI 1995 90 300TDI |
||
3rd Oct 2016 4:23pm |
|
DAZ110 Member Since: 06 Dec 2007 Location: East Sussex Posts: 2034 |
This is the set I had on my previous 110:
http://www.gwynlewis4x4.co.uk/product/land...0-rtc4685/ Quite easy to fit and worked well. |
||
3rd Oct 2016 4:44pm |
|
Cupboard Member Since: 21 Mar 2014 Location: Suffolk Posts: 2971 |
I have rear of front and rear of rear.
Would definitely buy again, but did slightly modify the fitting instructions so I didn't have to bolt through the rear tub. |
||
3rd Oct 2016 6:18pm |
|
Hairysteve Member Since: 15 Jun 2015 Location: Surrey Posts: 692 |
Evening Familymad, fitted them on Saturday and was very easy and am pleased with the results
Went out in landy straight away while it was raining and then checked and was pleasantly surprised how much road dirt were on them after such a short drive Happy to offer more feedback if you wish Steve |
||
3rd Oct 2016 6:25pm |
|
RichLech Member Since: 09 Nov 2015 Location: West Sussex Posts: 115 |
I've got the full set. Rear of front wheels and both front and rear of rear wheels. Can recommend them all.
|
||
3rd Oct 2016 6:42pm |
|
miker Member Since: 13 Sep 2015 Location: Surrey Posts: 1762 |
I really should get a set of the front wheel ones. Bored of getting muddy water thrown up over my elbow and into my lap!
|
||
3rd Oct 2016 10:19pm |
|
Iain Member Since: 09 Nov 2014 Location: Aberdeenshire Posts: 79 |
I've all three on my 110 and they are well worth it. Look tidy and original but more importantly protect alot from road shot blasting. COTAG 4x4 Response
2015 XS USW Corris Grey on DF MTR's |
||
4th Oct 2016 6:37pm |
|
familymad Member Since: 13 Dec 2011 Location: Bucks Posts: 3479 |
Top comments gents thank you. Fitted the fronts this evening. I have another set for the 130 front too.
Will do the rear of rear ones tomorrow. Really should have bought the 3rd set as too many boxes have already arrived this month and I'm no sure I can buy any more in Oct 1951 80" S1 2.0 1995 110 300TDI 1995 90 300TDI |
||
4th Oct 2016 7:30pm |
|
familymad Member Since: 13 Dec 2011 Location: Bucks Posts: 3479 |
Haven't checked the instructions yet. Do I have to drill the tub? 1951 80" S1 2.0 1995 110 300TDI 1995 90 300TDI |
||
4th Oct 2016 7:31pm |
|
Avelingporter Member Since: 25 Jan 2016 Location: Southampton Posts: 405 |
I didn't have to drill the tub on my 90. I fitted the full set the weekend after I picked up my new 90. That was after CSK dinotrolled the underside. The combination in my view really works well to protect the underside. He only addition later was to spray the the rear of the side tube steps with stone chip paint as had forward side of the rears doesn't quit stop stone/mud splatter on the very end of these.
|
||
4th Oct 2016 7:53pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis