![]() | Home > Puma (Tdci) > cooking puma style |
![]() ![]() |
|
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6318 ![]() ![]() ![]() |
and I'm not talking big cats spit roast.
this could perhaps go under the general topic heading I supose but since I've got a puma engine.... how's had a go at cooking (well heating up) a cornish pasty on their engine? I'm off on my travels tomorrow (only milton keynes) and I've just spotted some cornish pasties in the fridge. If I get stuck somewhere a nice hot cornish pasty would be rather nice. how best to heat up tho. where how, long, engine on, engine off (but hot obviously) and how long should I set my timer - medium to well done preferably. |
||
![]() |
|
nakatanenga Member Since: 12 Nov 2010 Location: Neumarkt Posts: 546 ![]() ![]() |
There is a USA based cookbook on the market how to cook on the manifold.....
I just don't remeber the title. WANTED: SII or SIII in max 1.5k |
||
![]() |
|
RLD Member Since: 29 Jun 2007 Location: Lancs Posts: 858 ![]() ![]() |
The book Chasing Rainbows by Peter&Eileen Crichton is a good one they went round the world in a disco 2 and cooked on the manifold or transmision all the time RLD fabricator of Hidden Winch Mount for D3/4 roof racks jerry can holders CB aerial mounts and much more and agent for Helsport Tents and gear
|
||
![]() |
|
110SEB Member Since: 29 Jan 2009 Location: Essex, England Posts: 1444 ![]() ![]() ![]() |
Manifold Desitiny: http://www.amazon.com/Manifold-Destiny-Gui...0375751408 |
||
![]() |
|
Glynparry25 Member Since: 16 Feb 2009 Location: Miserable Midlands Posts: 3015 ![]() ![]() ![]() |
Have been heating pasties and sausage rolls on engines for years now. Just wrap it in foil and find anywhere on top of the engine that will hold it secure and just leave it on until hungry.... obviously only works for pre-cooked food
![]() Glyn ![]() |
||
![]() |
|
Zinke Member Since: 27 Jan 2009 Location: Scunthorpe Posts: 670 ![]() ![]() ![]() |
I used to do it with my tractor when i was bored of eating cold food. Tin foil is the key and no leaks anywhere near where you put the food or it tastes a bit nasty!
Used to find anything up to 45 mins on the manifold for a scotch egg was good but that was on a 8 litre engine working flat out so may take a little longer on a landy in the winter. Corn on the cob works well wrapped in tin foil, used to grab a bit from the game cover strips and cook it on the manifold with the tin foil from my sandwiches. Also a bit of rabbit or pigeon works well if ive been out with my gun. Not tried it with road kill yet but im sure the day will come! lol Pete. |
||
![]() |
|
wyvern Member Since: 13 Dec 2009 Location: Cornwall Posts: 2117 ![]() ![]() ![]() |
....... you could just use the heater on full heat by your left leg for a while .. its able to cook my leg well enough !! ..
![]() Elgar -TDCI(Puma) 110XS Dormobile - now sold Devon & Cornwall 4x4 Response - DC126 ![]() |
||
![]() |
|
AndrewS Member Since: 10 Apr 2007 Location: Hereford Posts: 3709 ![]() ![]() ![]() |
Wrap in tin foil and place it in the pasty holder
![]() ![]() |
||
![]() |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6318 ![]() ![]() ![]() |
interesting ....
AndrewS - pasty holder......is this another extra the jolo has or are you refering to the infamous drinks holder ontop of the engine? |
||
![]() |
|
Toplink Member Since: 05 Dec 2010 Location: Somerset Posts: 159 ![]() ![]() |
[quote="Caterham"]interesting ....
AndrewS - pasty holder......is this another extra the jolo has or are you refering to the infamous drinks holder ontop of the engine?[/quote] Thats not a drinks holder,I put a pair of my wifes knickers here for wiping the dip stick. ![]() 2007 Defender HTop. 1952 Series One 80" 1977 Muir-Hill 111. 2014 Triumph Tiger800xc 1999 Discovery 2 td5 1982 Ransomes TSR300D. 2002 Yamaha XT600e. 2010 Freelander2 (the wifes) 2008 John Deere X140 |
||
![]() |
|
mse Member Since: 06 Apr 2008 Location: UK Posts: 5059 ![]() ![]() ![]() |
I was thinking the built in cup warmer come soup dish come food holder would be ideal Mike
|
||
![]() |
|
mowcop Member Since: 03 Jul 2009 Location: Staffs Posts: 108 ![]() ![]() ![]() |
I used to do it at work "on site" whilst maintaining locomotives, turn up at 09:00 put it in the V of the engine (3020 HP 2 stroke diesel) remove it at 12:00 piping hot.
Simples! |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)