Member Since: 16 Apr 2016
Location: Outer Space
Posts: 1324
Torque on pulley bearing bolt -2.4 serpentine belt tensioner
Yeah gidday, I want to remove it.
So it's not the bolt that attaches the tensioner arm:
Click image to enlarge
But the bolt that hold the pulley bearing (and pulley) in place. On the right here:
Click image to enlarge
WSM, don't have it!
Perhaps just do by feel, and add some threadlock?
Interestingly, it looks like it's been removed previously (I'm third owner)Solved the bowel problem, working on the consonants...
23rd Jun 2016 11:35pm
AlanH
Member Since: 15 Mar 2010
Location: WA
Posts: 242
Has the pulley got worn bearings or something requiring it to be removed? If it has and you replace them OK I wouldn't bother too much about a tension wrench just tighten well as per normal and if you like use a touch of Loctite or similar.
AlanH.
26th Jun 2016 8:59am
agentmulder
Member Since: 16 Apr 2016
Location: Outer Space
Posts: 1324
Yes, yes and yes
Done.Solved the bowel problem, working on the consonants...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
26th Jun 2016 8:59am
