Home > For Sale & Wanted > [For Sale] UPOL Raptor Super Tough Urethane Truck Bed Liner |
|
|
muddybaldboy Member Since: 09 Apr 2012 Location: Ruthin Posts: 395 |
Pm sent He who dies with the most toys...wins!
|
||
4th Jun 2016 11:05am |
|
leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8581 |
Looks like one stained box has sold.
So have 1 x 4 litre kit in stained box left 3 x 4 litre kit in unstained boxes left. Brendan |
||
4th Jun 2016 11:20am |
|
leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8581 |
Now down to
So have 1 x 4 litre kit in stained box left £65 inc carriage to mainland UK 1x 4 litre kit in unstained boxes left. £74 inc carriage to mainland UK Brendan Last edited by leeds on 18th Jun 2016 7:14pm. Edited 1 time in total |
||
18th Jun 2016 5:12pm |
|
ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637 |
Is this stuff any good?
Some refurb vendors offer it, but having never seen it in the flesh I'm wary Cheers Andy |
||
18th Jun 2016 6:28pm |
|
leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8581 |
I have never used it myself so can not comment from a practical knowledge based point of view.
We have been asked to assist in someone doing a garage clearance due to ill health. Brendan |
||
18th Jun 2016 7:17pm |
|
muddybaldboy Member Since: 09 Apr 2012 Location: Ruthin Posts: 395 |
It's good stuff.
Easy to spray and so far very tough (this was the second lot I purchased) He who dies with the most toys...wins! |
||
19th Jun 2016 6:12am |
|
ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637 |
Thanks, have you tried to apply it with a brush or roller?
Thinking of doing my bumper with it as an experiment, but I don't have access to a spray gun or booth for that matter!! Cheers Andy |
||
19th Jun 2016 7:31am |
|
shanecl Member Since: 20 Mar 2013 Location: Louth Posts: 505 |
I was told for the proper effect you need a shultz gun.
|
||
19th Jun 2016 7:48am |
|
leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8581 |
As stated, have not used it ourselves.
Met one of the Raptor reps at Bad Kissingen and he had samples which were roller brushed on. Instructions for use here states that it can be applied using a roller. However I am guessing it will not get quite as smooth/even coat as a proper spray system. Brendan |
||
19th Jun 2016 8:55am |
|
muddybaldboy Member Since: 09 Apr 2012 Location: Ruthin Posts: 395 |
I've only used shutz gun, it gives a nice textured finish. No booth needed just mask well.
Roller I feel would be better finish than brush He who dies with the most toys...wins! |
||
19th Jun 2016 10:34pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis