DEFENDER2.NET - View topic - New Switches - Old Dash

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > New Switches - Old Dash - inserts?

Page 1 of 1

Print this entire topic ·

chopcat

Member Since: 11 Sep 2012
Location: Pembrokeshire
Posts: 412

New Switches - Old Dash - inserts?

I have the super harness for the heated seats from Matt and have 2 questions.
Difficult one first.
I would like to use the modern Puma switches which you would normally use in a modern dash with the recesses so the switch sits flush. Does anyone know of somewhere I can get an insert that i can install into the dash then fit the switch into?

Question 2

The harness links into the Puma hazard warning light switch (which i dont have) i am assuming that the three wires taken from there are live/neutral and the white/green = ignition live. Is that right?

Cheers as always
CC

6th Apr 2016 9:21am

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

Puma hazard warning light switch and TD5 hazard warning light switch are same

you pre face lift centre dash ?

6th Apr 2016 9:26am

chopcat

Member Since: 11 Sep 2012
Location: Pembrokeshire
Posts: 412

I am that old ....yes

6th Apr 2016 9:36am

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

give my minute

6th Apr 2016 9:38am

chopcat

Member Since: 11 Sep 2012
Location: Pembrokeshire
Posts: 412

i haven't got your minute

6th Apr 2016 9:41am

chopcat

Member Since: 11 Sep 2012
Location: Pembrokeshire
Posts: 412

This is what we need....

http://www.expeditioncentre.com.au/online-...panel.html

now to find one here

Click image to enlarge

6th Apr 2016 9:44am

L90Andy

Member Since: 29 May 2014
Location: Stratford-Upon-Avon
Posts: 719

Firsts Four sell them here:
http://www.firstfour.co.uk/item/2177292/de...tch-bezel- Instagram: L90andy

My 1984 Ninety: http://www.defender2.net/forum/topic56071.html - SOLD!
My 2015 Defender: http://www.defender2.net/forum/topic39625.html - SOLD!

6th Apr 2016 10:03am

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6608

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

I cut 3 Puma switches into the centre panel but it was a lot of work. Looks great though

Click image to enlarge

There were some 3-bank holders for sale last week: http://www.defender2.net/forum/topic45360.html

1988 90 Td5 NAS soft top

2015 D90 XS SW

6th Apr 2016 10:10am

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

Click image to enlarge

this one pre face

Click image to enlarge

Click image to enlarge

this one 2001 to 2015

Last edited by dorsetsmith on 6th Apr 2016 10:31am. Edited 1 time in total

6th Apr 2016 10:12am

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6608

I'm not sure how your loom is configured and what current it's drawing from its splices behind the hazard switch.

However, both permanent and ignition switched 12V are available behind the centre panel on a pre-2002MY Td5.

Permanent from the lighter (purple with green stripe) and ignition from the rear wiper switch (white with green stripe).

1988 90 Td5 NAS soft top

2015 D90 XS SW

Last edited by Martin on 8th Jul 2016 8:30am. Edited 1 time in total

6th Apr 2016 10:18am

chopcat

Member Since: 11 Sep 2012
Location: Pembrokeshire
Posts: 412

Sorted on the bezels

Thanks DS for the diagrams

Peter at first four is indeed your man for these bezels and i have them on the way

I have mailed Matt who I am sure will confirm the wiring

looking like we are nearly sorted.

if i only had known when i re did me dash last month that i would be buying some heated seats!

6th Apr 2016 10:19am

PaulMc

Member Since: 17 Jan 2009
Location: Kent
Posts: 502

L90Andy wrote:
Firsts Four sell them here:
http://www.firstfour.co.uk/item/2177292/de...tch-bezel-

As said, they can be bought from FirstFour on their website, or their eBay shop.

They look 'factory' with 2 x Puma heated seat switches in them -

Click image to enlarge

Click image to enlarge

The keyway moulding on the switch's body will need to be removed -

Click image to enlarge

.

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

Paul.
1989 Arles Blue 2.5TD 110 Hardtop
1999 Epsom Green Discovery II 4.0 V8i 'XS'

6th Apr 2016 10:28am

GREENI

Member Since: 22 Aug 2010
Location: staffs
Posts: 10383

The centre panel that Martin cut is made of sliced ham, you're better off starting with a cut bit of alloy!

6th Apr 2016 11:19am

Stiff1

Member Since: 09 Dec 2014
Location: Cornwall
Posts: 597

2007 Defender 110 Puma 2.4 XS CSW Java Black

Thanks Martin, I do indeed have a few three switch holders for sale as well as one for the puma hazard switch.

Left over front abandoned project.

I was going to recreate Andy's cubby idea as below but have gone down a different route now.

Anyone wanting inspiration only need read his thread.

Click image to enlarge

6th Apr 2016 3:31pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum