DEFENDER2.NET - View topic - Brake light fuse blowing TD5

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Brake light fuse blowing TD5

Page 1 of 1

Print this entire topic ·

Stevesims

Member Since: 18 Oct 2015
Location: Plymouth
Posts: 3

Brake light fuse blowing TD5

First of all thanks to LandroverAnorak for the explanation on wiring the 13 pin wiring loom.
This was my original task ,but when connected to the Caravan I noticed no brake lights or reversing light.
I disconnected the wiring loom from under the rear wheel arch.
Still blowing fuse.

I then re connected the 13pin wiring loom.
Still blowing fuse.

I then unplugged the brake light switch found on top and to the rear of the servo .
Still blowing fuse.

I then connected the two green wires from the brake light switch ,effectively by passing the switch.
Still blowing fuse.

I'm starting to run out of 15amp fuses now!

I checked all the brake light bulbs by visual inspection, the high level brake light bulb had blown.
Replaced the high level brake light bulb.

Brake lights and reversing lamps all working .

20th Mar 2016 8:46pm

Screbble

Member Since: 26 Apr 2015
Location: Lancashire
Posts: 2109

2004 Defender 90 Td5 XS CSW Zambezi Silver

Glad you got it sorted. Just goes to show you - if you apply logic and persevere

25th Mar 2016 10:15am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum