DEFENDER2.NET - View topic - Parking sensor kit

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Parking sensor kit

Page 1 of 1

Print this entire topic ·

pcoote

Member Since: 01 Aug 2010
Location: Oxford
Posts: 83

2010 Defender 110 Puma 2.4 USW Stornoway Grey

Parking sensor kit

Just wondering if anyone has fitted a gizmo parking sensor to their pride and joy. Obviously fitting a rear bumper step and waiting for the bump would do the job but I'm thinking of something more like this http://www.chameleondirect.co.uk/index.php...cts_id=319

12th Nov 2010 8:09am

dgardel

Member Since: 30 Nov 2008
Location: Veneto (Heart & Head)
Posts: 3586

http://www.parkingsensors.co.uk/adhesive_p...udio_4.asp

No drill, no fear

I have it and it works well Discovery 5 td6 HSE Stornoway Gray Outback Engineering Limited Edition

IID Pro MV License

12th Nov 2010 8:41am

leeds

Member Since: 28 Dec 2009
Location: West Yorkshire
Posts: 8580

One of the first modification Barbara demanded on her 110

was reversing beep beeps.

Have them mounted under the rear corner bumperettes. Copper tube glued screwed to underneath of bumperette. Sounder fitted at roof level rear n/s corner

A few minor problems, continuous note when caravan trailer is attached and you try to reverse, ice can form on sensor giving a continuous note. Also you get false warnings from long grass etc.

HTH

Brendan

12th Nov 2010 6:54pm

dgardel

Member Since: 30 Nov 2008
Location: Veneto (Heart & Head)
Posts: 3586

Here my work

Click image to enlarge

Click image to enlarge

quite invisible installation.......

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

Discovery 5 td6 HSE Stornoway Gray Outback Engineering Limited Edition

IID Pro MV License

12th Nov 2010 8:05pm

MK

Member Since: 28 Aug 2008
Location: Santiago
Posts: 2410

2007 Defender 110 Puma 2.4 SW Chawton White

Hey Dani

is the "beam" a cone or is it flat?

thanks

MK Puma 110" SW

.............................................................
Earth first. Other planets later

12th Nov 2010 8:51pm

szracer

Member Since: 10 Oct 2010
Location: Cotswolds
Posts: 356

Are the inner two sensors mounted to custom brackets? If so, where are they bolted to?

And to hijack the thread, a really stupid question (since I am going to be attempting to fit my NAS rear step this weekend):

I understand the power connector for the towing electrics is behind the right hand rear speaker. Where do you run it out to the bumper?

dgardel wrote:
Here my work

quite invisible installation.......

2010 110 XS USW (the slow one)
1960 Alfa Romeo Giulietta SZ (the fast one)
2005 Ducati ST3
1954 Sunbeam S8

12th Nov 2010 9:40pm

dgardel

Member Since: 30 Nov 2008
Location: Veneto (Heart & Head)
Posts: 3586

MK wrote:
Hey Dani

is the "beam" a cone or is it flat?

thanks

MK

"elliptical" cone with the major axle parallel to the ground Discovery 5 td6 HSE Stornoway Gray Outback Engineering Limited Edition

IID Pro MV License

12th Nov 2010 10:58pm

dgardel

Member Since: 30 Nov 2008
Location: Veneto (Heart & Head)
Posts: 3586

szracer wrote:
Are the inner two sensors mounted to custom brackets? If so, where are they bolted to?

And to hijack the thread, a really stupid question (since I am going to be attempting to fit my NAS rear step this weekend):

I understand the power connector for the towing electrics is behind the right hand rear speaker. Where do you run it out to the bumper?

Hi James,
I made two small brackets bolted to the two existent small brackets originally welded on the NAS rear step for the trailer connector.

The "towing electrics power connector" is behind the black plastic cover INSIDE the rear right wheel arc/wing, after the fuel pipes.

I taken the +12V and the ground from the rear reverse lamp. This twin cable and the sensor cables (4) pass through a 32mm dia hole (made by me) with appropriate grommet and convoluted tube.

In this area (behind the right hand rear speaker) I put the ECU and the beeper also. Discovery 5 td6 HSE Stornoway Gray Outback Engineering Limited Edition

IID Pro MV License

12th Nov 2010 11:14pm

szracer

Member Since: 10 Oct 2010
Location: Cotswolds
Posts: 356

Thanks!

Now all I have to do is to work out how to put the NAS rear step together (see my separate post!)

dgardel wrote:
szracer wrote:
Are the inner two sensors mounted to custom brackets? If so, where are they bolted to?

And to hijack the thread, a really stupid question (since I am going to be attempting to fit my NAS rear step this weekend):

I understand the power connector for the towing electrics is behind the right hand rear speaker. Where do you run it out to the bumper?

Hi James,
I made two small brackets bolted to the two existent small brackets originally welded on the NAS rear step for the trailer connector.

The "towing electrics power connector" is behind the black plastic cover INSIDE the rear right wheel arc/wing, after the fuel pipes.

I taken the +12V and the ground from the rear reverse lamp. This twin cable and the sensor cables (4) pass through a 32mm dia hole (made by me) with appropriate grommet and convoluted tube.

In this area (behind the right hand rear speaker) I put the ECU and the beeper also.

2010 110 XS USW (the slow one)
1960 Alfa Romeo Giulietta SZ (the fast one)
2005 Ducati ST3
1954 Sunbeam S8

13th Nov 2010 12:10am

pcoote

Member Since: 01 Aug 2010
Location: Oxford
Posts: 83

Hey thanks D.

Excellent pics, hooking up to the reverse light so they fire up auto when reversing, nice.

Having a Defender in Venice must be interesting, I couldn't see on your pics but I'm assuming you have a snorkel

I took my TD5 all over Italy, including Sicily, got the 24hr ferry from Genoa. Parking in Palermo was always a worry but never had any problems. In Sicily I came back to my parked up wagon to see these guys standing round my car looking at it, but they just wanted to say 'Bella macchina' to me and shook my hand. The TD5 was stolen last year off my own drive, tsk.

13th Nov 2010 9:59am

dgardel

Member Since: 30 Nov 2008
Location: Veneto (Heart & Head)
Posts: 3586

pcoote wrote:
Hey thanks D.

Excellent pics, hooking up to the reverse light so they fire up auto when reversing, nice.

Having a Defender in Venice must be interesting, I couldn't see on your pics but I'm assuming you have a snorkel

I took my TD5 all over Italy, including Sicily, got the 24hr ferry from Genoa. Parking in Palermo was always a worry but never had any problems. In Sicily I came back to my parked up wagon to see these guys standing round my car looking at it, but they just wanted to say 'Bella macchina' to me and shook my hand. The TD5 was stolen last year off my own drive, tsk.

a looooong snorkel....

Discovery 5 td6 HSE Stornoway Gray Outback Engineering Limited Edition

IID Pro MV License

13th Nov 2010 1:46pm

alantd

Member Since: 14 Dec 2008
Location: Northamptonshire
Posts: 1513

2007 Defender 110 Puma 2.4 XS CSW Tonga Green

I've also fitted these (although I only went with the two sensor version). Works brilliantly. Obviously I get erroneous readings with the sankey attached but otherwise wouldn't be without it when parking in the high street.

It took about 30 mins to fit. One that started out as a 2.4 TDCi 110 XS
+ New Defender 110 First Edition

19th Nov 2010 11:46pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum