EdF
Member Since: 22 Jun 2009
Location: 15m west Inverness
Posts: 24
 
|
| For Sale: Workshop Compressor | |
It's about 7 years old, 'Air Force' make, 17cfm, works on domestic power but off a 16amp socket (the blue plastic, three round pin design). Only been used a few times, mainly to respray a Defender. Complete with air hose reel, underseal gun, spraygun, tyre inflator, loads of hose, a few fittings, plug and socket, air-fed mask (cost £150 itself). No longer required and taking up workshop space.. I've put wheels on it, so it can be moved easily. Photo on my gallery. Can't ship, it's too big and would need a crate... Identical to the bottom one on this page, but with a higer output.. Not heavy, could be lifted into a LWB or Disco.
http://www.r-techwelding.co.uk/welding_equ...power_240v
These are about £700 new.. £350 with all the bits..
Please note my location! Make the most of this life, you may not have skis or a Landy in the next.
|
26th Nov 2010 8:02pm |
|
bigee
Member Since: 24 Oct 2010
Location: middle of nowhere...
Posts: 78
 
|
Hi Ed,you dont fancy respraying your new Disco then 
|
|
26th Nov 2010 9:44pm |
|
EdF
Member Since: 22 Jun 2009
Location: 15m west Inverness
Posts: 24
|
You know, I hadn't thought of that... Really, I HADN'T thought of that!!! She's lovely just the way she is.. Also, the Defender I did was in Super Traffic and I did it one panel at a time then bolted it all together. The D3 doesn't really lend itself to that..  Make the most of this life, you may not have skis or a Landy in the next.
|
|
26th Nov 2010 11:42pm |
|
