 | Home > Puma (Tdci) > removal or rear speaker trim panel |
 
|
|
|
| RRUK Site Supporter Member Since: 31 Mar 2010 Location: Leicestershire Posts: 2025  
|
First you remove the upper rear trim panel that surrounds the quarter light windows, to do this simply grab near the door and pull into the vehicles towards the front seats and the metal springs clips (2 on each panel) will undo. Most likely one or both will be found either on the body work afterwards or on the back of the trim panel.
Then it is easy to access the speaker panel and wrestle it out too, AFAIK it's not held in place by anything. 2016 D4 HSE 1998 110 TUM HS FFR Hard Top XD WOLF 1982 Series 3 SWB Petrol |
||
20th Jan 2016 5:41pm |
|
| Rosco Member Since: 03 Dec 2010 Location: Burntwood Posts: 1833 
|
Lower panel is held in place with three plastic screws with heads made of cheese. It's also likely that the two clips holding the top panel will deform enough not to re-seat properly afterwards but these are pennies each from Duckworths
Thinking about it you might get away without taking the top panel off 2007 - Stornoway Grey 90 XS SW - Gone 2002 - Black Discovery II - Gone 2014 - Montalcino Red 110 XS SW |
||
|
20th Jan 2016 6:48pm |
|
| Vitesse Member Since: 21 Mar 2014 Location: Sussex Posts: 381 
|
many thanks! That's great.
2015 90 XS Santorini Black |
||
|
21st Jan 2016 8:08am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
