DEFENDER2.NET - View topic - Puma 2.4 engine oil leak

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Puma 2.4 engine oil leak

Page 1 of 1

Print this entire topic ·

Rogeo1983

Member Since: 18 Nov 2015
Location: Horsham
Posts: 30

2010 Defender 90 Puma 2.4 CSW Zambezi Silver

Puma 2.4 engine oil leak

Hi Folks,

Today while driving the oil pressure light came on. I turned off the engine immediately, and coasted to a stop. Luckily I had a few litres of oil in the back. I refilled it which took over 3 litres. Oil has come out under pressure in a spray on the forward part of the engine on the left passenger side, just behind the pulleys. The spray of oil was under the bonnet in a small area, so I am hoping for just a burst pipe.

It was too dark to go digging, I will look at it tomorrow, but can anyone point me to any engine oil diagrams, or point me in the right direction.

59 plate defender 90 2.4.

Many thanks

22nd Dec 2015 10:22pm

ickle

Member Since: 22 Jul 2010
Location: South Vendee
Posts: 1786

2008 Defender 110 Puma 2.4 CSW Alpine White

Vacuum pump!

22nd Dec 2015 10:35pm

DAZ110

Member Since: 06 Dec 2007
Location: East Sussex
Posts: 2041

2013 Defender 90 Puma 2.2 XS CSW Barolo Black

Yep...vacuum pump!

22nd Dec 2015 10:41pm

Rogeo1983

Member Since: 18 Nov 2015
Location: Horsham
Posts: 30

Ok guys,

Sounds like vacuum pump then!

Is it hard to replace? Is there any diagrams online to show what to look at?

Cheers

22nd Dec 2015 10:46pm

Rogeo1983

Member Since: 18 Nov 2015
Location: Horsham
Posts: 30

I have just looked up the vacuum pump, and yes that looks like the source.

With the oil leak, where would the leak be from? Is it the gasket, or from the bearing.

Thanks guys, really appreciate the quick replies

22nd Dec 2015 10:50pm

Treebeard

Member Since: 27 Jun 2012
Location: Forest of Dean
Posts: 40

They cost about £100 and are simple to fit. latest pn was LR012183 when we did ours a couple of years back

22nd Dec 2015 11:26pm

DAZ110

Member Since: 06 Dec 2007
Location: East Sussex
Posts: 2041

This post might help:

http://www.defender2.net/forum/post44746.html

22nd Dec 2015 11:30pm

Treebeard

Member Since: 27 Jun 2012
Location: Forest of Dean
Posts: 40

Sorry pn was LR 014973

22nd Dec 2015 11:33pm

Treebeard

Member Since: 27 Jun 2012
Location: Forest of Dean
Posts: 40

Plus gasket LR 004381. All covered on page 191 of the defender tdci workshop manual which you can find as a pdf on www

22nd Dec 2015 11:43pm

Rogeo1983

Member Since: 18 Nov 2015
Location: Horsham
Posts: 30

Thanks treebeard

I am guessing that your link www was reference to the lack of workshop manuals!!!

I will pick one up tm and I think I will do a full service while I am getting dirty anyway!

With the fact that this pump sprayed out oil under high pressure, is there anything else that I should be looking at while replacing the pump?

Does the vacuum pump have its own engine oil supply?

I don't quite understand how it works, or even why the engine oil is there under such high pressure.

Many thanks

23rd Dec 2015 12:12am

Supacat

Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018

2013 Defender 110 Puma 2.2 XS DCPU Keswick Green

Rogeo1983 wrote:
I am guessing that your link www was reference to the lack of workshop manuals!!!

Quite the opposite - look at the link to the other thread:

Grockle wrote:
pm dgardel,he's the chap

but then it's even easier - this will get you there:

https://onedrive.live.com/?id=4BC2D89C85C7...9C85C7C171

23rd Dec 2015 10:12am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum